Nissan Rogue (T33) 2021-Present Service Manual: Theft Alm

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / System Description :: Diagnosis System (bcm) / Theft Alm

CONSULT Function (BCM - THEFT ALM)

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitored item

[Unit] 		Description

Door switch assist

[On/Off] 		Indicates [On/Off] condition of front door switch RH.

Door switch rear right

[On/Off] 		Indicates [On/Off] condition of rear door switch RH.

START SW

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Door switch rear left

[On/Off] 		Indicates [On/Off] condition of rear door switch LH.

Ignition switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Door switch driver

[On/Off] 		Indicates [On/Off] condition of front door switch LH.

Door lock and unlock switch (unlock)

[On/Off] 		Indicates [On/Off] condition of UNLOCK signal from door lock/unlock switch.

Door lock and unlock switch (lock)

[On/Off] 		Indicates [On/Off] condition of LOCK signal from door lock/unlock switch.
    Signal Buffer
    CONSULT Function (BCM - SIGNAL BUFFER) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) appl...
    Trunk
    CONSULT Function (BCM - TRUNK) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable t...

    Other materials:

    Dtc/circuit Diagnosis. B1002-13 Lap Pre-Tensioner Rh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B1002-13 Lap pre-tensioner RH (Lap pre-tensioner right hand) Diagnosis condition When ignition switch is ON. Signal (terminal) Lap pre-tensioner RH signal ...

    Steering Switch Signal B Circuit
    Component Function Check CHECK COMBINATION METER INPUT SIGNAL CONSULT Ignition switch ON. Select “Steering switch input” in “Data monitor” mode of “M&A”. Check that the function operates normally according to the following conditions: Condition Value CONTRO ...

    Dtc/circuit Diagnosis. B1029-09 Front Seat Belt Pre-Tensioner Lh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B1029-09 Front seat belt pre-tensioner LH (Front seat belt pre-tensioner left hand) Diagnosis condition When ignition switch is ON. Signal (terminal) Front ...