Nissan Rogue (T33) 2021-Present Service Manual: System Description :: Handling Precaution

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Power Supply, Ground & Circuit Elements / System Description :: Handling Precaution

Lithium Ion Battery 12V

  • When performing jump start, do not supply power from the 12V sub battery (lithium ion battery).

  • Do not supply power from the 12V sub battery (lithium ion battery) to external devices.

  • Do not disassemble the 12V sub battery (lithium ion battery).

  • Do not hit with hammer or trample the 12V sub battery (lithium ion battery).

  • Do not remove air bleeding tube from the 12V sub battery (lithium ion battery).

    System Description. System
    Lithium Ion Battery 12v System Description SYSTEM DIAGRAM Component Function 12V sub battery (lithium ion battery) Refer to 12V Sub Battery (Lithium Ion Battery). Combination Me...
    System Description. Diagnosis System (lithium Ion Battery 12v). Consult Function
    Consult Function Diagnosis Description APPLICATION ITEMSCONSULT can perform the following diagnosis modes via CAN communication and the 12V sub battery (lithium ion battery). Di...

    Other materials:

    U0416 Can Communication
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0416 00 Invalid data (ABS C/U) (Invalid Data Received From Nissan Ariya Vehicle Dynamics Control Module) Diagnosis condition Ignition switch ON Signal (t ...

    Diagnosis System (av Control Unit)
    Nissanconnect with 8" Color Display On Board Diagnosis Function The AV control unit on board diagnosis performs the functions listed in the table below:DESCRIPTION Mode Description Self Diagnosis Audio system diagnosis. Diagnoses the connections across system components. ...

    Removal and Installation. 12v Battery Current Sensor
    Exploded View : 12V battery current sensor : Harness connector : N·m (kg-m, in-lb) Removal and Installation REMOVALDisconnect the 12V battery current sensor connector . Remove negative cable mounting nut , and then remove the negative cable . Loosen 12V battery cu ...