Nissan Rogue (T33) 2021-Present Service Manual: System Description :: Diagnosis System (lithium Ion Battery 12v). Consult Function

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Power Supply, Ground & Circuit Elements / System Description :: Diagnosis System (lithium Ion Battery 12v). Consult Function

Consult Function

Diagnosis Description

APPLICATION ITEMS

CONSULT can perform the following diagnosis modes via CAN communication and the 12V sub battery (lithium ion battery).

Diagnosis mode CGW Status Description
Restricted Mode Diag Test Mode Open Mode
Self Diagnostic Result Display Display Display Display non-network DTC which 12V sub battery (lithium ion battery) memorizes
CGW Information Display Display Display

  • Display the current CGW mode

  • Enables CGW to switch mode
ECU Identification Display Display Display The part number of 12V sub battery (lithium ion battery) can be checked.
Network-DTC* Display Display Display Display network DTC which 12V sub battery (lithium ion battery) memorizes when performing "Diagnosis (All System)".

*: Displays when performing "Diagnosis (All System)".

SELF-DIAGNOSTIC RESULTS

DTC Index

When “CRNT” is displayed on “Self Diagnostic Result”

  • The system is presently malfunctioning.

When “PAST” is displayed on “Self Diagnostic Result”

  • System malfunction in the past is detected, but the system is presently normal.

CGW INFORMATION

Display the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status form Restricted mode to Diag Test Mode/Open Mode.

For the method of switching CAN Gateway status, CONSULT Function

ECU IDENTIFICATION

Displays the part number of the 12V sub battery (lithium ion battery).

    System Description. Handling Precaution
    Lithium Ion Battery 12V When performing jump start, do not supply power from the 12V sub battery (lithium ion battery). Do not supply power from the 12V sub battery (lithium ion...
    Wiring Diagram. Harness Layout
    Outline Harness Layout Refer to Harness Layout. Engine Room Harness Harness Layout ENGINE ROOM HARNESS - BATTERY VIEW (WITH ProPILOT Assist 2.1)Refer to Harness Layout.ENGINE RO...

    Other materials:

    Evtc Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the electric intake valve timing control module for damage, bend and loose connection (unit side and connector side). ...

    Basic information
    The following are approximate capacities for your Nissan Rogue. Actual refill capacities may vary slightly. When refilling, always follow the procedure described in the "8. Do-it-yourself" section to confirm the proper amount for your Nissan Rogue. Fuel Engine oil Drain and refill Genuine "NI ...

    Fuel Injector Offset Learning
    Description Fuel injector offset learning is an operation to allow ECM to learn fuel injector offset data. This operation must be performed after the following parts are replaced: Each time injector or ECM is replaced. (For details, refer to Work Procedure.) Work Procedure PRECONDITIONI ...