Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Wiper and Washer System Symptoms

Nissan Rogue (T33) 2021-Present Service Manual / Driver Controls :: Wiper & Washer / Symptom Diagnosis :: Wiper and Washer System Symptoms

Symptom Table (Without Rain and Light Sensor)

NOTE:

Perform the "Self diagnosis result" with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.

Symptom Possible cause Inspection item
Front wiper does not operate HI only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between IPDM E/R and front wiper motor

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper motor (HI) circuit

    Refer to Diagnosis Procedure.

  3. IPDM E/R

    Refer to Removal and Installation.
LO and INT

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between front wiper motor and IPDM E/R

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper motor (LO) circuit

    Refer to Refer to Component Function Check.

  3. IPDM E/R

    Refer to Removal and Installation.
LO only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
INT only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
HI, LO and INT

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between IPDM E/R and front wiper motor

  • Harness between front wiper motor and ground

SYMPTOM DIAGNOSIS

Refer to Diagnosis Procedure.
Front wiper does not stop HI only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper motor (HI) circuit

    Refer to Diagnosis Procedure.

  3. IPDM E/R

    Refer to Removal and Installation.
LO only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
INT only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
Front wiper does not operate normally Intermittent adjustment cannot be performed

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Intermittent control linked with Nissan Ariya vehicle speed cannot be performed

  • Wiper INT operation setting

  • BCM

  1. Check the Wiper INT operation setting is linked with Nissan Ariya vehicle speed by combination meter.

  2. BCM

    Refer to Removal and Installation.
Wiper is not linked to the washer operation

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Does not return to stop position [Repeatedly operates for 10 seconds and then stops for 20 seconds. After that, it stops the operation. (Fail-safe)]

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between

    Combination switch (wiper and washer switch) and BCM

  • Harness between front wiper motor and IPDM E/R

  • Front wiper motor

Front wiper stop position signal circuit

Refer to Component Function Check.
Front washer does not operate normally

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front washer pump relay

  • Rear washer pump relay

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between front washer pump relay and IPDM E/R

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front washer circuit

    Refer to Diagnosis Procedure.
 
Rear wiper does not operate ON only

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between Combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
INT only

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
ON and INT

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between rear wiper motor and BCM

  • Harness between rear wiper motor and ground

  • Rear wiper motor

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Rear wiper motor circuit

    Refer to Diagnosis Procedure.
Rear wiper does not stop ON only

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
INT only

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Rear wiper does not operate normally Wiper is not linked to the washer operation

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between rear wiper motor and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Rear wiper does not return to the stop position. [Stops after a 5 seconds operation. (Fail-safe)]

  • BCM

  • Rear wiper motor

  • Harness between rear wiper motor and BCM

Rear wiper stop position signal circuit

Refer to Diagnosis Procedure.
Rear washer does not operate normally

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front washer pump relay

  • Rear washer pump relay

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between rear washer pump relay and IPDM E/R

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Rear washer circuit

    Refer to Diagnosis Procedure.

  3. Front and rear washer pump.

    Refer to Removal and Installation.
Washer fluid level warning indicator malfunction

  • Washer fluid level switch

  • Harness between washer fluid level switch and combination meter

  • Combination meter

 Washer fluid level switch circuit. Refer to Diagnosis Procedure.

Symptom Table (With Rain and Light Sensor)

NOTE:

Perform the "Self diagnosis result" with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.

Symptom Possible cause Inspection item
Front wiper does not operate HI only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between IPDM E/R and front wiper motor

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper motor (HI) circuit

    Refer to Diagnosis Procedure.

  3. IPDM E/R

    Refer to Removal and Installation.
LO and AUTO

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between front wiper motor and IPDM E/R

  • Harness between rain and light sensor and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper motor (LO) circuit

    Refer to Component Function Check.

  3. Rain and light sensor

    Refer to Removal and Installation.

  4. IPDM E/R

    Refer to Removal and Installation.
LO only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
AUTO only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Rain and light sensor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between rain and light sensor and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Rain and light sensor

    Refer to Removal and Installation.

  3. IPDM E/R

    Refer to Removal and Installation.
HI, LO and AUTO

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between IPDM E/R and front wiper motor

  • Harness between front wiper motor and ground

SYMPTOM DIAGNOSIS

Refer to Diagnosis Procedure.
Front wiper does not stop HI only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front wiper motor

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper motor (HI) circuit

    Refer to Diagnosis Procedure.

  3. IPDM E/R

    Refer to Removal and Installation.
LO only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
AUTO only

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. IPDM E/R

    Refer to Removal and Installation.
Front wiper does not operate normally Sensitivity adjustment cannot be performed

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Sensitivity control linked with Nissan Ariya vehicle speed cannot be performed

  • Wiper AUTO operation setting

  • BCM

  1. Check the Wiper AUTO operation setting is linked with Nissan Ariya vehicle speed by combination meter.

  2. BCM

    Refer to Removal and Installation.
Wiper is not linked to the washer operation

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Does not return to stop position [Repeatedly operates for 10 seconds and then stops for 20 seconds. After that, it stops the operation. (Fail-safe)]

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Harness between

    Combination switch (wiper and washer switch) and BCM

  • Harness between front wiper motor and IPDM E/R

  • Front wiper motor

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front wiper stop position signal circuit

    Refer to Component Function Check.

  3. IPDM E/R

    Refer to Removal and Installation.
Front washer does not operate normally

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front washer pump relay

  • Rear washer pump relay

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between front washer pump relay and IPDM E/R

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Front washer circuit

    Refer to Diagnosis Procedure.
 
Rear wiper does not operate ON only

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
AUTO only

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
ON and AUTO

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between rear wiper motor and BCM

  • Harness between rear wiper motor and ground

  • Rear wiper motor

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Rear wiper motor circuit

    Refer to Diagnosis Procedure.
Rear wiper does not stop ON only

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
INT only

  • Combination switch (wiper and washer switch)

  • Harness between combination switch (wiper and washer switch) and BCM

  • BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Rear wiper does not operate normally Wiper is not linked to the washer operation

  • BCM

  • Combination switch (wiper and washer switch)

  • Harness between rear wiper motor and BCM

Combination switch (wiper and washer switch)

Refer to Symptom Table.
Rear wiper does not return to the stop position. [Stops after a 5 seconds operation. (Fail-safe)]

  • BCM

  • Rear wiper motor

  • Harness between rear wiper motor and BCM

Rear wiper stop position signal circuit

Refer to Diagnosis Procedure.
Rear washer does not operate normally

  • BCM

  • IPDM E/R

  • Combination switch (wiper and washer switch)

  • Front washer pump relay

  • Rear washer pump relay

  • Harness between combination switch (wiper and washer switch) and BCM

  • Harness between rear washer pump relay and IPDM E/R

  1. Combination switch (wiper and washer switch)

    Refer to Symptom Table.

  2. Rear washer circuit

    Refer to Diagnosis Procedure.

  3. Front and rear washer pump.

    Refer to Removal and Installation .
Washer fluid level warning indicator malfunction

  • Washer fluid level switch

  • Harness between washer fluid level switch and combination meter

  • Combination meter

 Washer fluid level switch circuit. Refer to Diagnosis Procedure.  
    Dtc/circuit Diagnosis. Washer Fluid Level Switch Circuit
    Diagnosis Procedure CHECK WASHER FLUID LEVEL SWITCH CIRCUIT Disconnect combination meter and washer fluid level switch connector. Check continuity between combination meter harn...
    Symptom Diagnosis. Front Wiper Does Not Operate
    Description The front wiper does not operate under any operation conditions. Diagnosis Procedure CHECK FRONT WIPER REQUEST SIGNAL INPUT CONSULT Select “ALL SIGNALS” in "Data...

    Other materials:

    Dtc/circuit Diagnosis. B2f71-23 Stop Lamp
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2F71-23 Stop lamp (Stop lamp) Diagnosis condition When brake pedal is depressed Signal (terminal) Stop lamp switch 1 signal Threshold When stop lam ...

    P0500 Vss
    DTC Description DESCRIPTIONECM receives vehicle speed signals from two different paths via CAN communication line: One is from the ABS actuator and electric unit (control unit) via the combination unit and the other is from TCM.DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagno ...

    P2614 Intake Camshaft Position Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2614 00 A camshaft posi signal B1 (Camshaft A Position Signal Output Circuit/Open Bank 1 ) A Diagnosis condition Engine running at idle Signal (termin ...