Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: The Braking Force of Parking Brake Is Low
Description
The parking brake braking force is low and the vehicle moves backward when parked on an incline.
Diagnosis Procedure
REAPPLY THE PARKING BRAKE (1)
-
Pull the parking brake switch, and apply the parking brake.
-
Pull the parking brake switch 2 seconds ore mode.
Is the Nissan Ariya vehicle moving backward?
YES>>GO TO 2.
NO>>NORMAL
PERFORM THE SELF DIAGNOSIS RESULT
CONSULT
Select "Self diagnosis result" mode of "ABS".
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 3.
CHECK REAR DISC BRAKE SYSTEM
Check the rear disc brake system.
-
Rear brake pad: Refer to Inspection and Adjustment.
-
Rear disc rotor: Refer to Inspection and Adjustment.
-
Rear brake caliper (and parking brake actuator): Refer to Inspection and Adjustment.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace error-detected pars.
-
Rear brake pad: Refer to Removal and Installation.
-
Rear disc rotor: Refer to Removal and Installation.
-
Rear brake caliper (and parking brake actuator): Refer to Removal and Installation.
REAPPLY THE PARKING BRAKE (2)
Pull the parking brake switch again.
Is the Nissan Ariya vehicle moving backward?
YES>>Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation.
NO>>NORMAL
Other materials:
Fuses
Engine compartment
Basic information
WARNING
Never use fuses with a different amperage rating from what is specified on the fuse box cover. Doing so may damage the electrical system or cause a fire.
If electrical equipment in the Nissan Rogue stops working, inspect the fuses for an open el ...
C1076-55 Not Configured
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C1076
55
Not configured
(Not configured)
Diagnosis condition
When ignition switch is ON.
When the power supply voltage is normal.
Signal (ter ...
Periodic Maintenance. Brake Fluid
Inspection
BRAKE FLUID LEVEL
Check that the brake fluid level in the reservoir tank is within the standard (between MAX − MIN lines).
Visually check for any brake fluid leakage around the reservoir tank.
Check the brake system for any leakage if the fluid level is extremely low (lo ...
