Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Panic Alarm Function Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Security Control System / Symptom Diagnosis :: Panic Alarm Function Does Not Operate

Description

Panic alarm does not operate when press the PANIC ALARM button of Intelligent Key.

Diagnosis Procedure

CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)

Press the LOCK button of Intelligent Key.

Are all doors LOCKED?

YES>>

GO TO 2.

NO>>

Check Intelligent Key system (remote keyless entry function). Refer to System Description.

CHECK HEADLAMP FUNCTION

Check headlamp function. Refer to Symptom Table.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace malfunctioning parts.

CHECK HORN FUNCTION

Check horn function. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to Removal and Installation.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Vehicle Security Alarm Does Not Activate
    Description Alarm does not operate when alarm operating condition is satisfied. Diagnosis Procedure CHECK DOOR SWITCH Check door switch. Refer to Component Function Check. Is th...
    Symptom Diagnosis. Remote Engine Start Function Does Not Operate
    Description Engine does not start when operating REMOTE ENGNE START button of Intelligent Key.NOTE: Check that vehicle is under the condition shown in “Conditions of Nissan Ar...

    Other materials:

    Dtc/circuit Diagnosis. Automatic Back Door Serial Communication
    Diagnosis Procedure CHECK AUTOMATIC BACK DOOR SERIAL COMMUNICATION SIGNAL Ignition switch ON. Check signal between BCM harness connector and ground using oscilloscope. (+) (–) Signal (Reference value) (Approx.) BCM Connector Terminal B26 (with type B meter) 83 Gro ...

    System Description. Component Parts. Drive Mode System
    Drive Mode System Component Parts Location No. Component Function 1. Drive mode select switch Refer to Drive Mode Select Switch. 2. Chassis control module Chassis control module controls the drive mode select system. Refer to Component Parts Location (without ProPILOT Assi ...

    P0191 Frp Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0191 00 FRP SENSOR A (Fuel Rail Pressure Sensor Circuit Range/Performance Bank 1) Diagnosis condition Ignition switch ON Signal (terminal) Fuel rail pressur ...