Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Moonroof and Sunshade Do Not Operate Properly

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Roof / Symptom Diagnosis :: Moonroof and Sunshade Do Not Operate Properly

Description

Moonroof and sunshade do not operate normally.

  • Moonroof tilt up/down, open/close or sunshade open/close does not operate.

  • Moonroof tilt up/down, open/close or sunshade open/close operation is slow.

  • Judder occurs during open/close operation of moonroof and sunshade.

Diagnosis Procedure

CHECK GLASS LID

Check the following items:

  • Cracks, damage, or deformation of weather-strip.

  • Sticking of weather-strip.

  • Loose or missing glass lid mounting bolt.

  • Misalignment of glass lid.

    Refer to Adjustment.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK MOONROOF UNIT ASSEMBLY

Check the following items:

  • Damage, deformation or trapped foreign material of slide rail.

  • Insufficient application of grease to sliding section of slide rail.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK SUNSHADE

Check sunshade for damage, deformation, of interference with other parts.

Refer to Removal and Installation.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the malfunctioning parts.

CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Check BCM power supply and ground circuit.

Refer to Diagnosis Procedure

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace the malfunctioning parts.

CHECK MOONROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT

Check moonroof motor assembly power supply and ground circuit.

Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 6.

NO>>

Repair or replace the malfunctioning parts.

CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT

Check sunshade motor assembly power supply and ground circuit.

Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 7.

NO>>

Repair or replace the malfunctioning parts.

CHECK LIN COMMUNICATION CIRCUIT

Check LIN communication circuit.

  • Moonroof motor assembly: Refer to Diagnosis Procedure.

  • Sunshade motor assembly: Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 8.

NO>>

Repair or replace the malfunctioning parts.

CHECK COMMUNICATION CIRCUIT

Check communication circuit.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 9

NO>>

Repair or replace the malfunctioning parts.

CHECK MOONROOF SWITCH AND SUNSHADE SWITCH

Check moonroof switch and sunshade switch.

  • Moonroof switch: Refer to Component Function Check.

  • Sunshade switch: Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

    Dtc/circuit Diagnosis. Lin Communication Circuit
    Moonroof Motor Assembly Diagnosis Procedure CHECK LIN COMMUNICATION SIGNAL Ignition switch OFF. Disconnect moonroof motor assembly harness connector. Ignition switch ON. Check s...
    Symptom Diagnosis. Sunshade Does Not Operate Properly
    Description Sunshade does not operate normally. Sunshade open/close does not operate. Sunshade open/close operation is slow. Judder occurs during open/close operation of sunshad...

    Other materials:

    Informations de base
    Exemple Le système de sonar du Nissan Rogue émet des signaux sonores afin d’informer le conducteur de la présence d’obstacles autour du véhicule. Cette détection est assurée par des capteurs sonar installés dans les pare-chocs avant et arrière. Lorsque le système de sonar est ac ...

    B2721-88 Center Sensor [rl]
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen items (Trouble diagnosis content) DTC detection condition B2721-88 CENTER SENSOR [RL] (Center sensor [RL]) Diagnosis condition When ignition switch is ON Signal (terminal) — Threshold Communication error D ...

    Rear Final Drive: R145. Unit Removal and Installation. Rear Final Drive Assembly
    Rear Final Drive Assembly Exploded View Final drive mounting bracket Mounting stopper Rear final drive assembly : N·m (kg-m, ft-lb) : Always replace after every disassembly. Removal and Installation REMOVALNOTE: When replacing AWD control unit (integrated with act ...