Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Manual Function Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Symptom Diagnosis :: Manual Function Does Not Operate

All Component

Diagnosis Procedure

CHECK DRIVER SEAT CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT

Check driver seat control unit power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Check BCM power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

REPLACE DRIVER SEAT CONTROL UNIT

  1. Replace driver seat control unit. Refer to Removal and Installation.

  2. Confirm the operation again.

Does it operate normally?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

Power Seat

Diagnosis Procedure

CHECK POWER SEAT SWITCH GROUND CIRCUIT

Check power seat switch LH ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

REPLACE DRIVER SEAT CONTROL UNIT

  1. Replace driver seat control unit. Refer to Removal and Installation.

  2. Confirm the operation again.

Does it operate normally?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

Seat Sliding

Diagnosis Procedure

CHECK SLIDING MECHANISM

Check for the following.

  • Mechanism deformation or pinched foreign materials.

  • Interference with other parts because of poor installation.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK SLIDING SWITCH

Check sliding switch. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK SLIDING MOTOR

Check sliding motor LH. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

Seat Reclining

Diagnosis Procedure

CHECK RECLINING MECHANISM

Check for the following.

  • Mechanism deformation or pinched foreign materials.

  • Interference with other parts because of poor installation.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK RECLINING SWITCH

Check reclining switch. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK RECLINING MOTOR

Check reclining motor LH. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

Thigh Support

Diagnosis Procedure

CHECK THIGH SUPPORT MECHANISM

Check for the following.

  • Mechanism deformation or pinched foreign materials.

  • Interference with other parts because of poor installation.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK THIGH SUPPORT SWITCH

Check thigh support switch. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK THIGH SUPPORT MOTOR

Check thigh support motor LH. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

Seat Lifting

Diagnosis Procedure

CHECK LIFTING MECHANISM

Check for the following.

  • Mechanism deformation or pinched foreign materials.

  • Interference with other parts because of poor installation.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK LIFTING SWITCH

Check lifting switch. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK LIFTING MOTOR

Check lifting motor LH. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

Door Mirror

Diagnosis Procedure

CHECK DOOR MIRROR MECHANISM

Check for the following.

  • Mechanism deformation or pinched foreign materials.

  • Interference with other parts because of poor installation.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK DOOR MIRROR CIRCUIT

Check door mirror circuit.

  • Door mirror LH: Refer to Diagnosis Procedure (With automatic drive positioner system).

  • Door mirror RH: Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

    Dtc/circuit Diagnosis. Power Supply and Ground Circuit (driver Seat Control Unit)
    Diagnosis Procedure CHECK FUSE Ignition switch OFF. Check that the following fuse is not blown (open). Signal name Fuse No. Battery power supply 54 (20A) Is the fuse blown (open...
    Symptom Diagnosis. Memory Function Does Not Operate
    All Component Diagnosis Procedure CHECK MANUAL OPERATION Check manual operation. Does it operate normally? YES>> GO TO 2. NO>> Repair or replace the malfunctioning p...

    Other materials:

    Dtc/circuit Diagnosis. B2c41-04 Power Window Motor Fl
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2C41-04 Power window motor FL [Front power window motor (driver side)] Diagnosis condition When ignition switch ON or power window timer operates. Signal (ter ...

    Dtc/circuit Diagnosis. B2c95-64 Combination Switch
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B2C95-64 Combination switch (Combination switch) Diagnosis condition Ignition switch OFF (auto ACC status) Signal (terminal) Combination switch signal ...

    Preparation
    Special Service Tools Tool number (Kent-Moore No.) Tool name Description — (—) Model GR8-1200 Multitasking battery and electrical diagnostic station Tests batteries, starting and charging systems and charges batteries. For operating instructions, refer to diagnostic statio ...