Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Intelligent Key Interlock Function Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Symptom Diagnosis :: Intelligent Key Interlock Function Does Not Operate

Diagnosis Procedure

CHECK VEHICLE SPECIFICATION

Check if vehicle equipped navigation system.

Is equipped navigation system?

YES>>

GO TO 2.

NO>>

GO TO 3.

CHECK LOG-IN FUNCTION

Check log-in function. Refer to System Description.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Refer to Work Flow.

PERFORM INTELLIGENT KEY INTERLOCK STORING

  1. Perform INTELLIGENT KEY INTERLOCK STORING. Refer to Description.

  2. Check Intelligent Key interlock function operation.

Does it operate normally?

YES>>

Intelligent Key interlock function is normal.

NO>>

GO TO 4.

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check door lock/unlock using Intelligent Key button operation.

Does door lock/unlock with Intelligent Key button?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Refer to Diagnosis Procedure.

    Symptom Diagnosis. Entry/exit Assist Function Does Not Operate
    Diagnosis Procedure CHECK SYSTEM SETTING Check system setting. Refer to Description. Check entry/exit assist function operation. Does it operate normally? YES>> Entry/exit...
    Symptom Diagnosis. Memory Indicator Does Not Operate
    Diagnosis Procedure CHECK MEMORY INDICATOR Check memory indicator. Refer to Component Function Check. Is the inspection result normal? YES>> Check intermittent incident. R...

    Other materials:

    Engine oil
    Checking engine oil level Park the vehicle on a level area and apply the parking brake. Warm up the engine to operating temperature. Shut the engine off and wait at least 10 minutes. Remove the dipstick, wipe it clean, then fully reinsert it. Remove the dipstick again and check the oil le ...

    Steering Switch Signal a Circuit
    Component Function Check CHECK COMBINATION METER INPUT SIGNAL CONSULT Ignition switch ON. Select “Steering switch input” in “Data monitor” mode of “M&A”. Check that the function operates normally according to the following conditions: Condition Value CONTRO ...

    Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting
    NVH Troubleshooting Chart Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and SUSPECTED PARTS Symptom Reference FRONT SUSPENSION Noise Shake Vibration Shimmy Judder Poor quality ride or Improper installation, looseness ...