Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Entry/exit Assist Function Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Symptom Diagnosis :: Entry/exit Assist Function Does Not Operate

Diagnosis Procedure

CHECK SYSTEM SETTING

  1. Check system setting. Refer to Description.

  2. Check entry/exit assist function operation.

Does it operate normally?

YES>>

Entry/exit assist function is normal.

NO>>

GO TO 2.

CHECK DOOR SWITCH (FRONT LH)

Check door switch (front LH). Refer to ComponentFunctionCheck.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

    Symptom Diagnosis. Memory Function Does Not Operate
    All Component Diagnosis Procedure CHECK MANUAL OPERATION Check manual operation. Does it operate normally? YES>> GO TO 2. NO>> Repair or replace the malfunctioning p...
    Symptom Diagnosis. Intelligent Key Interlock Function Does Not Operate
    Diagnosis Procedure CHECK VEHICLE SPECIFICATION Check if vehicle equipped navigation system. Is equipped navigation system? YES>> GO TO 2. NO>> GO TO 3. CHECK LOG-IN...

    Other materials:

    Booster seats
    Basic information For proper booster seat installation in your Nissan Rogue, follow these guidelines carefully. Precautions on booster seats WARNING If a booster seat or seat belt is used incorrectly, the risk of injury or death in a sudden stop or collision increases significantly: En ...

    P26a5 Multi-Way Control Valve Position Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P26A5 00 ENGINE COOLANT B/V A POSI SEN (Engine coolant bypass valve A position sensor circuit range/performance) Diagnosis condition — Signal (terminal) Mu ...

    Garage mode system
    The liftgate can be set to open to a specific height by performing the following: 1. Open the liftgate. 2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some resistance when being manually adjusted). 3. While holding the liftgate in position, press an ...