Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Door Mirror Does Not Operate
Diagnosis Procedure (Without automatic drive positioner system)
CHECK DOOR MIRROR CIRCUIT
Check door mirror. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
REPLACE DOOR MIRROR MOTOR
Replace door mirror motor. Refer to Removal and Installation.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 3.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to Removal and Installation.
Is the inspection result normal?
YES>>Inspection End.
NO>>Check Intermittent incident. Refer to Intermittent Incident.
Diagnosis Procedure (With automatic drive positioner system)
CHECK AUTOMATIC DRIVE POSITIONER SYSTEM
Check door mirror operate with automatic drive positioner system. Refer to System Description.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Check automatic drive positioner system operation. Refer to Diagnosis Procedure.
CHECK DOOR MIRROR CIRCUIT
Check door circuit.
-
Door mirror LH: Refer to Diagnosis Procedure.
-
Door mirror RH: Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Check Intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials:
P0607 Ecm
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0607
00
ECM
(Control module performance)
Diagnosis condition
Ignition switch ON
Signal (terminal)
—
Threshold
ECM internal communication sys ...
P0014 Evt Control
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0014
00
EXH/V TIM CONT-B1
(“B” Camshaft position - timing over-advanced or system performance bank 1)
Diagnosis condition
Engine speed: 1,000 – 6,0 ...
Brake Warning Lamp
Component Function Check
CHECK BRAKE WARNING LAMP FUNCTION (1)
Check that brake warning lamp in combination meter turns ON for
approximately 1 second after ignition switch is ON (before engine
start).
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Pr ...
