Nissan Rogue (T33) 2021-Present Service Manual: Service Data and Specifications (sds)

Nissan Rogue (T33) 2021-Present Service Manual / Suspension :: Road Wheels & Tires / Service Data and Specifications (sds)

Road Wheel

ALUMINUM WHEEL

Item Limit
Runout Axial runout Less than 0.3 mm (0.012 in)
Radial runout
Allowable unbalance Dynamic (At flange) Less than 5 g (0.17 oz) (one side)
Static (At flange) Less than 10 g (0.35 oz)

STEEL WHEEL (EMERGENCY)

Item Limit
Runout Axial runout (Average) Less than 1.2 mm (0.047 in)
Radial runout (Average) Less than 1.3 mm (0.051 in)

Tire Air Pressure

Unit: kPa (kgf/cm2, psi)

Item Standard
Front Rear
235/65R17 (without Rock Creek®) 250 (2.5, 36) 230 (2.3, 33)

235/65R17 (with Rock Creek®)

235/60R18

235/55R19 		230 (2.3, 33) 210 (2.1, 30)

T155/80D17

T165/90D17

T155/90D18 		420 (4.2, 60)
    Removal and Installation. Tire Pressure Sensor
    Exploded View Screw Tire pressure sensor Valve Valve core Valve cap : Comply with the assembly procedure when tightening. Refer to Removal and Installation. : N·m (kg-m, in-lb)...
    Brakes. Brake System

    Other materials:

    Symptom Diagnosis. Take Away Warning Does Not Operate
    Diagnosis Procedure CHECK COMBINATION METER BUZZER Check combination meter buzzer. Refer to Diagnosis Procedure (Full TFT meter) or Diagnosis Procedure (7 inch information display). Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning parts. ...

    Precaution. Precautions
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passeng ...

    Sheet Metal Work
    Sheet Metal Work Tools Sheet Metal Work Tools This section explains various tools used in body repair work. Hammers A hammer is used to correct dents, projections or other deformations. Various shapes have been designed according to their purposes.(1) TYPES AND FEATURES OF HAMMERS(2) SELECTI ...