Nissan Rogue (T33) 2021-Present Service Manual: Diagnosis System (vcr Control Module)

Nissan Rogue (T33) 2021-Present Service Manual / Engine :: Engine Control System / Kr15ddt :: System Description / Diagnosis System (vcr Control Module)

CONSULT Function

SELF DIAGNOSTIC RESULT MODE

Freeze Frame Data and 1st Trip Freeze Frame Data

Freeze frame data item*1 Description
Mileage The mileage at the moment a malfunction is detected is displayed.
DTCcount The DTC conunt at the moment a malfunction is detected is displayed.

*1: The items are the same as those of 1st trip freeze frame data.

DATA MONITOR MODE

NOTE:

  • The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

  • For reference values of the following items, Refer to Values On The Diagnosis Tool.

Monitored Item

Monitored item Unit Description
ENGINE RPM rpm The engine speed sent from ECM is displayed.
Ignition switch Indicates [On/Off] condition from ignition switch signal.
Battery voltage V The power supply voltage of ECM is displayed.
    Diagnosis System (ecm)
    Diagnosis Description Driving Pattern CAUTION: Always drive at a safe speed. DRIVING PATTERN ADriving pattern A means a trip satisfying the following conditions. Engine speed re...
    Diagnosis System (electric Intake Valve Timing Control Module)
    CONSULT Function SELF DIAGNOSTIC RESULT MODEFreeze Frame Data and 1st Trip Freeze Frame Data Freeze frame data item*1 Description Mileage The mileage at the moment a malfunction...

    Other materials:

    Symptom Diagnosis. All Doors Do Not Lock/unlock or Trunk/back Door Do Not Open with Request Switch
    Description All doors do not lock/unlock using door request switch.NOTE: Before starting diagnosis check that vehicle condition is as shown in “Conditions of Nissan Ariya vehicle”, and check each symptom. SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation (re ...

    Wl Chg Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). Wireless charger unit Harness connec ...

    Chassis Can Communication 3 Circuit
    Diagnosis Procedure CHECK CAN DIAGNOSIS Check the "Network Diagnosis" results from CONSULT to see that the ITS CAN communication 1 circuit, ITS CAN communication 4 circuit and diagnostic CAN communication circuit have no malfunction. Are the ITS CAN communication 1 circuit, ITS CAN communicat ...