Nissan Rogue (T33) 2021-Present Service Manual: Removal and Installation :: Washer Fluid Level Switch

Nissan Rogue (T33) 2021-Present Service Manual / Driver Controls :: Wiper & Washer / Removal and Installation :: Washer Fluid Level Switch

Removal and Installation

CAUTION:

When washer fluid level switch is removed, washer fluid may come out, so be prepared with a container to receive the fluid and never allow fluid to be sprinkled.

REMOVAL

Turn the steering wheel to improve access to the washer tank near the front tire (RH).

Remove the front spoiler (RH). Refer to Removal and Installation.

Partially remove and reposition the front fillet molding (RH). Refer to Exploded View.

Partially remove and reposition the front fender protector (RH). Refer to Exploded View.

Disconnect the harness connector from the washer fluid level switch.

Remove the washer fluid level switch.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

After installation, refill washer tank with washer fluid, and then check that there is no leakage.

    Removal and Installation. Washer Tank
    Exploded View Except for Canada 1. Washer tank cap 2. Washer tank inlet 3. O-ring 4. Washer tank — — — — : Nissan Ariya Vehicle front : N·m (kg-m, in-lb) For Canada1. W...
    Removal and Installation. Front and Rear Washer Pump
    Exploded View Washer tank Packing Front and rear washer pump : Nissan Ariya Vehicle front Removal and Installation CAUTION: When front and rear washer pump is removed, washer fl...

    Other materials:

    Awd Warning Icon/display
    Diagnosis Procedure CHECK POWER SUPPLY AND GROUND CIRCUIT Perform the trouble diagnosis for power supply and ground circuit. Refer to Diagnosis Procedure. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the error-detected parts. PERFORM SELF DIAGNOSIS RES ...

    Charge Air Cooler Electric Water Pump Relay
    Component Inspection CHECK ELECTRIC WATER PUMP RELAY Turn ignition switch OFF. Remove electric water pump relay. Check the continuity between electric water pump relay terminals under the following conditions. Terminals Conditions Continuity and 12 V direct current supply ...

    Symptom Diagnosis. Driver Side Power Window Does Not Operate
    Diagnosis Procedure CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning parts. CHE ...