The ProPILOT Assist suite available on the Nissan Rogue is a hands-on driver-assistance technology designed primarily for limited-access highways. Its purpose is to help the vehicle stay centered in its lane and maintain a preset distance from the vehicle ahead. Depending on configuration, the system on the Nissan Rogue is available in three levels with the following capabilities:
ProPILOT Assist:
ProPILOT Assist 1.1 (if equipped):
ProPILOT Assist 2.1 (if equipped):
NOTE:
A subscription is required to enable ProPILOT Assist 2.1 features on the Nissan Rogue.
To determine if your Nissan Rogue is equipped:
Vehicles with ProPILOT Assist or ProPILOT Assist 1.1 have the steering wheel shown below and a single roof-mounted antenna.
NOTE:
ProPILOT Assist 1.1 is included only on Nissan Rogue models equipped with the in-vehicle Map Locator system.
Vehicles with ProPILOT Assist 2.1 have a similar steering wheel but feature two roof-mounted antennas, with the left unit acting as the GNSS antenna.
NOTE:
Knowing which version your Nissan Rogue has is essential, as parts of the system description may not apply depending on equipment level.
WARNING
The following warnings apply to the full ProPILOT Assist suite — including ProPILOT Assist, ProPILOT Assist 1.1, ProPILOT Assist 2.1, Intelligent Cruise Control, Steering Assist, Lane Change Assist, Passing Assist, Driver Monitoring System, and conventional cruise control — collectively referred to as “ProPILOT Assist systems.”
ProPILOT Assist Systems OverviewBluetooth® Hands-Free Phone System without Navigation System (if so
equipped)
WARNING
Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
If you are unable to devote full attention
to vehicl ...
P0705 transmission range sensor A
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0705
T/M RANGE SENSOR A
[Transmission Range Sensor A Circuit (PRNDL
Input)]
When all of the following conditions are satisfied and this state is
...
ECU diagnosis information
A/C AUTO AMP.
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one
based on the following priority
chart.
Priority
Det ...