Nissan Rogue (T33) 2021-Present Service Manual: Oil Level Sensor Signal Circuit

Nissan Rogue (T33) 2021-Present Service Manual / Driver Information & Multimedia :: Meter, Warning Lamp & Indicator / Type a :: Dtc/circuit Diagnosis / Oil Level Sensor Signal Circuit

DiagnosisProcedure

CHECK OIL LEVEL SENSOR CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect combination meter harness connector and oil level sensor harness connector.

  3. Check continuity between combination meter harness connector and oil level sensor harness connector.

    Combination meter Oil level sensor Continuity
    Connector Terminal Connector Terminal

    M73 (U.S.A. production)

    M77 (Japan production)     		37 F63 1 Yes

  4. Check continuity between combination meter harness connector and ground.

    Combination meter Ground Continuity
    Connector Terminal

    M73 (U.S.A. production)

    M77 (Japan production)     		37 No

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair harness or connector.

CHECK OIL LEVEL SENSOR GROUND CIRCUIT

  1. Check continuity between oil level sensor harness connector and combination meter harness connector.

    Oil level sensor Combination meter Continuity
    Connector Terminal Connector Terminal
    F63 2

    M73 (U.S.A. production)

    M77 (Japan production)     		38 Yes

  2. Check continuity between oil level sensor harness connector and ground.

    Oil level sensor Ground Continuity
    Connector Terminal
    F63 2 No

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector.

CHECK OIL LEVEL SENSOR

Check oil level sensor. Refer to Component Inspection.

Is the inspection result normal?

YES>>

Replace combination meter Refer to Removal and Installation.

NO>>

Replace oil level sensor. Refer to Exploded View.

Component Inspection

CHECK OIL LEVEL SENSOR

  1. Remove the oil level sensor. Refer to Exploded View.

  2. Check the resistance of oil level sensor.

    Terminals

    Resistance (Ω)

    (Approx.)
    Oil level sensor
    1 2 3 –20

Is inspection result normal?

YES>>

Inspection End.

NO>>

Replace oil level sensor unit. Refer to Exploded View.

    Ambient Sensor Signal Circuit
    Diagnosis Procedure CHECK AMBIENT SENSOR POWER SUPPLY Ignition switch OFF. Disconnect ambient sensor harness connector. Ignition switch ON. Check voltage between ambient sensor ...
    Head up Display Switch Signal Circuit
    Diagnosis Procedure CHECK HEAD UP DISPLAY SWITCH SIGNAL CIRCUIT Ignition switch OFF. Disconnect Head Up Display unit harness connector and Head Up Display switch harness connect...

    Other materials:

    A-Bag Branch Line Circuit
    Diagnosis Procedure WARNING: Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes or more. (To discharge backup capacitor.) Never use unspecified tester or other measuring device. CHECK CONNECTOR Turn the ignition switch OFF. ...

    System
    System Description Without ProPILOT Assist 2.1SYSTEM DIAGRAM Component Description ECM ECM BCM System Description ABS actuator and electric unit (control unit) ABS Actuator and Electric Unit (Control Unit) Chassis control module Chassis Control Module TCM Comp ...

    P040c Egr Temperature Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P040C 00 EGR TEMP SENSOR A (EGR temperature sensor A circuit low) Diagnosis condition — Signal (terminal) — Threshold ECM detects that a vo ...