Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: U225b-87 Can Comm Err (ipdm E/r)

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / Dtc/circuit Diagnosis :: U225b-87 Can Comm Err (ipdm E/r)

DTC Description

DESCRIPTION

CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-High line, CAN-Low line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to CAN Communication Signal Chart.

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content) 		DTC Detection Condition
U225B–87

CAN comm err (IPDM E/R)

[CAN communication error (IPDM E/R)] 		Diagnosis condition Ignition switch is ON.
Signal (terminal) CAN communication signal
Threshold BCM cannot communicate CAN communication signal.
Diagnosis delay time 2 seconds or more.

POSSIBLE CAUSE

CAN communication system

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

CHECK SELF-DIAG RESULT

CONSULT

  1. Ignition switch ON and wait for 2 seconds or more.

  2. Select “Self diagnosis result” mode of “BCM”.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

DTC Diagnosis Procedure

CHECK CAN COMMUNICATION SYSTEM

Check CAN communication system. Refer to Trouble Diagnosis Flow Chart.

>>

Inspection End.

    Dtc/circuit Diagnosis. U2253-87 Can Comm Err (hvac)
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line...
    Dtc/circuit Diagnosis. U2314-87 Can Comm Err (anc)
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line...

    Other materials:

    Informations de base sur le système Intelligent Key du Nissan Rogue
    AVERTISSEMENT RELATIF AUX ONDES RADIO Impact sur les équipements médicaux : Les signaux et ondes radio émis par le système de votre Nissan Rogue peuvent interférer avec le bon fonctionnement des équipements médicaux électriques. Avant d'utiliser la clé intelligente, toute personne po ...

    P11a2 Vcr Motor Rotation Angle Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P11A2 00 VCR motor rotation angle sensor (Variable compression ratio motor rotation angle sensor) Diagnosis condition Ignition switch ON Signal (terminal) VC ...

    Dtc/circuit Diagnosis. Power Supply and Ground Circuit. Sonar Control Unit
    Sonar Control Unit Diagnosis Procedure CHECK FUSE Check that the following fuse is not blown (open). Power source Fuse No. Capacity ACC power supply #40 10 A Is the fuse blown (open)? YES>> Be sure to eliminate cause of malfunction before installing new fuse. NO>&g ...