Nissan Rogue (T33) 2021-Present Service Manual: Ipdm-E Branch Line Circuit

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Lan System / Can :: Dtc/circuit Diagnosis / Ipdm-E Branch Line Circuit

Diagnosis Procedure

CHECK CONNECTOR

  1. Turn the ignition switch OFF.

  2. Disconnect the battery cable from the negative terminal.

  3. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side).

    • IPDM E/R

    • Harness connector E152

    • Harness connector M31

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal and connector.

CHECK HARNESS FOR OPEN CIRCUIT

  1. Disconnect the connector of IPDM E/R.

  2. Check the resistance between the IPDM E/R harness connector terminals.

    IPDM E/R harness connector Resistance (Ω)
    Connector No. Terminal No.
    E120 24 22 Approx. 108 – 132

Is the measurement value within the specification?

YES>>

GO TO 3.

NO>>

Repair the IPDM E/R branch line.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check the power supply and the ground circuit of the IPDM E/R. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES (Present error)>>

Replace the IPDM E/R. Refer to Removal and Installation.

YES (Past error)>>

Error was detected in the IPDM E/R branch line.

NO>>

Repair the power supply and the ground circuit.

    A-Bag Branch Line Circuit
    Diagnosis Procedure WARNING: Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes or more. (To discharge backup capacitor.) Never...
    Adp Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damag...

    Other materials:

    B2231-16 Battery Voltage
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2231-16 Battery voltage (Battery voltage) Diagnosis condition When ignition switch is ON. Signal (terminal) Battery power supply Threshold 8 V or le ...

    P02cd Fuel Injector
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P02CD 00 CYL1 INJECTOR OFFSET LEARNING (Cylinder 1 Fuel Injector "A" Offset Learning At Max Limit) Diagnosis condition Engine running During injector ...

    Intelligent Key operation (models with request switch)
    Example Example You can conveniently lock or unlock the doors of your Nissan Rogue without taking the key out of your pocket or bag. When you carry the Intelligent Key with you, the Nissan Rogue allows controlling all doors by pressing the door handle request switch A (front doors) or the liftg ...