Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: How to enable/disable the TSR system
- Steering-wheel-mounted controls (left side)
- Vehicle information display
To turn the TSR system on or off in the Nissan Rogue, follow these steps:
- Press the
button until “Settings” appears in the vehicle information display, then press the scroll dial. Use the dial to select “Driver Assistance” and press it again. -
Type A models: Select “Traffic Sign Assist,” then choose “Speed Limit Sign” or “Speed Limit Warning” and toggle the setting on or off.
Type B models: Select “Speed Limit Sign” and toggle the setting on or off.
System temporarily unavailable
If the Nissan Rogue is parked in direct sunlight and the cabin temperature exceeds approximately 104ºF (40ºC), the TSR system may temporarily turn off. A warning message saying “Unavailable Camera Temperature High” will be shown.
Action to take:
The TSR system will automatically resume once the cabin temperature is reduced.
System malfunction
If the TSR system detects a malfunction, it will disable itself and display “Malfunction See Owner’s Manual.”
Action to take:
Safely stop the vehicle, switch off the engine, then restart it. If the message remains, the system should be inspected by a Nissan dealer.
System maintenance
The TSR system relies on the same multi-sensing front camera used for the Lane Departure Warning system, located near the inside mirror of the Nissan Rogue.
System operation
The system can display the following types of road signs:
Most recently detected speed limit
Reduce-speed alert
No-passing zone
CAUTION
The TSR system assists safe driving but does no ...
Other materials:
Repairing material
Foam Repair
During factory body assembly, foam insulators are installed in certain body
panels and locations around the
vehicle. Use the following procedure(s) to replace any factory-installed foam
insulators.
URETHANE FOAM APPLICATIONS
Use commercially available Urethane foam for sealant (f ...
P0112, P0113 IAT sensor
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P0112
IAT SEN/CIRCUIT- B1
(Intake air temperature sensor 1 circuit low
bank 1)
An excessively low voltage from the intake air temperature sensor ...
Brake fluid
Drain and Refill
CAUTION:
Do not spill or splash brake fluid on painted surfaces. Brake
fluid may damage paint. If brake fluid is
splashed on painted areas, wash it away with water immediately.
Prior to repair, turn the ignition switch OFF, disconnect the
ABS actuator and ...
