Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Fuel Efficient Driving Tips
Follow these Fuel Efficient Driving Tips to help maximize fuel economy in your Nissan Rogue.
1. Use smooth accelerator and brake input.
- Avoid rapid acceleration and sudden stops.
- Apply the accelerator and brakes smoothly.
- Maintain a consistent speed and coast when possible.
2. Maintain steady speed.
- Look ahead to anticipate stops and traffic flow.
- Time your speed with traffic lights to reduce unnecessary stopping.
- Smoother driving improves fuel efficiency.
3. Use A/C efficiently at higher speeds.
- Under 40 MPH (64 km/h), open windows are more efficient.
- Above 40 MPH (64 km/h), using A/C is more efficient due to reduced drag.
- Use recirculation mode to reduce cooling load.
4. Drive at economical speeds and distances.
- Following posted speed limits improves fuel economy.
- Maintain a safe distance to reduce unnecessary braking.
- Anticipate speed changes for smoother acceleration.
- Select the proper gear range for conditions.
5. Use cruise control.
- Cruise control helps maintain steady speed.
- Especially effective on flat highways for saving fuel.
6. Plan the shortest route.
- Use maps or navigation to reduce travel time and distance.
7. Avoid idling.
- Turn off the engine when safely stopped for 30–60 seconds.
8. Use automated toll passes.
- They allow you to maintain speed through toll booths and reduce stop-and-go driving.
9. Winter warm-up.
- Limit idling to preserve fuel.
- Most engines need no more than 30 seconds of idling at startup.
- Driving warms the engine faster than idling.
10. Keep your vehicle cool.
- Park in shade or covered areas when possible.
- Open windows briefly when entering a hot vehicle to cool the interior faster.
Increasing fuel economy
- Keep your engine properly tuned.
- Follow the recommended maintenance schedule.
- Maintain correct tire pressure; low pressure reduces fuel economy.
- Ensure wheels are correctly aligned.
Poor alignment increases tire wear and fuel consumption.
- Use engine oil with the recommended viscosity.
Other materials:
P025b Fuel Pump Module a
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P025B
00
FUEL PUMP MODULE A
(Fuel Pump Module "A" Control Circuit Range/Performance)
Diagnosis condition
Engine running
Signal (terminal)
—
Thre ...
Configuration
Description
Vehicle specification needs to be written with CONSULT because it is
not written after replacing the ABS actuator and electric unit (control
unit).The configuration requires network connection. CONSULT
connects to network and then it downloads the configuration data from
the ser ...
On Board Diagnostic (obd) System
Diagnosis Description
This system is an on board diagnostic system that records exhaust
emission-related diagnostic information and detects a
sensors/actuator-related malfunction. A malfunction is indicated by the
malfunction indicator lamp (MIL) and stored in ECU memory as a DTC. The
diagn ...
