Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: U2175-57 Can Comm Err (avm)

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / Dtc/circuit Diagnosis :: U2175-57 Can Comm Err (avm)

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content) 		DTC Detection Condition
U2175-57

CAN comm err (AVM)

[Control area network communication error (around view monitor)] 		Diagnosis condition -
Signal (terminal) -
Threshold MAC communication error
Diagnosis delay time -

POSSIBLE CAUSE

  • MAC communication error

  • BCM used in other vehicle is installed in the vehicle

  • BCM

  • Around view monitor control unit

FAIL-SAFE

-

DTC CONFIRMATION PROCEDURE

CHECK DTC PRIORITY

If DTC U2175-57 is displayed with DTC U1327-52 or DTC U1327-54, first perform the trouble diagnosis for DTC U1327-52 or U1327-54.

Is DTC U1327-52 or U1327-54 detected?

YES>>

Refer to DTC Description (U1327-52) or DTC Description (U1327-54).

NO>>

GO TO 2.

CHECK SELF DIAGNOSIS RESULT

CONSULT

  1. Ignition switch ON.

  2. Select “Self diagnosis result” mode of “BCM”.

Is DTC U2175-57 detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

DTC Diagnosis Procedure

CHECK DTC PRIORITY

If DTC U2175-57 is displayed with DTC U1327-52 or DTC U1327-54, first perform the trouble diagnosis for DTC U1327-52 or U1327-54.

Is DTC U1327-52 or U1327-54 detected?

YES>>

Refer to DTC Description (U1327-52) or DTC Description (U1327-54).

NO>>

GO TO 2.

CHECK SELF DAIGNOSIS RESULT

CONSULT

Select “Self diagnosis result” mode of “BCM”.

Is DTC U2175-57 detected with DTC U2140–57, DTC U2152–57 (with ProPILOT Assist 2.1) and DTC U2176–57 at the same time?

YES (all DTC codes are detected at the same time)>>

Replace BCM. Refer to Removal and Installation.

NO (all DTC codes are not detected at the same time)>>

GO TO 3.

CHECK CAN COMMUNICATION SYSTEM

Check CAN communication system. Refer to Trouble Diagnosis Flow Chart.

>>

Inspection End.

    Dtc/circuit Diagnosis. U216b-87 Can Comm Err (front Camera)
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line...
    Dtc/circuit Diagnosis. U2175-87 Can Comm Err (avm)
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line...

    Other materials:

    P1538 Ascd System
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P1538 00 Cruise control (Cruise control) Diagnosis condition Ignition switch ON Signal CAN communication signal Threshold ECM cannot receive a ...

    System Description. Diagnosis System (electrically-Driven Intelligent Brake Unit). Consult Function
    Consult Function Diagnosis Description APPLICATION ITEMCONSULT can display each diagnostic item using the diagnostic test modes as follows. Diagnosis mode Note   Self Diagnostic Result Display DTC which Electrically-driven Intelligent Brake Unit memorizes Data monitor Displays ...

    Symptom Diagnosis. Entry/exit Assist Function Does Not Operate
    Diagnosis Procedure CHECK SYSTEM SETTING Check system setting. Refer to Description. Check entry/exit assist function operation. Does it operate normally? YES>> Entry/exit assist function is normal. NO>> GO TO 2. CHECK DOOR SWITCH (FRONT LH) Check door switch (fro ...