Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2908-12 Slide Sensor

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Dtc/circuit Diagnosis :: B2908-12 Slide Sensor

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content) 		DTC detection condition
B2908-12 Slide Sensor Diagnosis condition When the ignition switch is ON.
Signal (terminal) Sliding Motor (terminal #3)
Threshold Short circuit to power supply
Diagnosis delay time 100 mili- seconds or more

POSSIBLE CAUSE

  • LH sliding motor

  • Driver seat control unit

  • Harness and connectors

FAIL-SAFE

Stop automatic drive position function.

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON and wait for 20 seconds or more.

  2. Check “Self diagnosis result” mode of “DRIVER SEAT”.

Is DTC detected?

YES>>

Refer to Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

Diagnosis Procedure

CHECK SLIDING MOTOR SENSOR SIGNAL

  1. Ignition switch OFF.

  2. Disconnect driver seat control unit and LH sliding motor.

  3. Check voltage between driver seat control unit harness connector and ground.

(+) (-) Voltage (approx.)
Driver seat control unit
Connector Terminal
B213 35 Ground 0 V

Is the inspection result normal?

YES>>

Connect driver seat control unit and LH sliding motor. Refer to Component Function Check.

NO>>

Repair the harness or connector.

    Dtc/circuit Diagnosis. B2908-11 Slide Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition B2908-11 Slide Sensor Diagnosis condition The Slide Sensor s...
    Dtc/circuit Diagnosis. B2908-31 Slide Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition B2908-31 Slide Sensor Diagnosis condition When the ignition ...

    Other materials:

    P02cd Fuel Injector
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P02CD 00 CYL1 INJECTOR OFFSET LEARNING (Cylinder 1 Fuel Injector "A" Offset Learning At Max Limit) Diagnosis condition Engine running During injector ...

    Main Line Between Lib 12v and M&a Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (connector side and harness side). Harness connector B41 Harness con ...

    System Description. Diagnosis System (occupant Detection System Control Unit)
    CONSULT Function APPLICATION ITEMCONSULT performs the following functions. Diagnosis mode CGW Status Description Restricted Mode Diag Test Mode Open Mode CGW Information Display Display Display Display the current CGW mode Enables CGW to switch mode Data mo ...