Nissan Rogue (T33) 2021-Present Service Manual: System Description :: Diagnosis System (occupant Detection System Control Unit)
CONSULT Function
APPLICATION ITEM
CONSULT performs the following functions.
| Diagnosis mode | CGW Status | Description | ||
|---|---|---|---|---|
| Restricted Mode | Diag Test Mode | Open Mode | ||
| CGW Information | Display | Display | Display |
|
| Data monitor | Display | Display | Display | Displays the real-time input signal of occupant detection system control unit. |
| Work supports | Non-display | Non-display | Display | This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT. |
CGW INFORMATION
Display the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status from Restricted mode to Diag Test Mode/Open Mode.
For the method of switching CAN Gateway status. Refer to CONSULT Function.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item | Contents |
|---|---|
|
Buckle Switch Status [Not Moni/Unfasten/Fasten/Reload] |
The switch status input from front seat belt buckle switch RH.
|
|
Buckle Switch Spec [Not Moni/Nor Op/Nor Cl/Frm ACU] |
Displays the spec of the front seat belt buckle switch RH.
|
|
Buckle Switch Status (Comm) [Not Moni/Moni(wir)/Frm ACU] |
Displays the status of the front seat belt buckle switch RH signal.
|
WORK SUPPORT
| Test item | Description |
| Zero point reset function | Perform zero point reset. Refer to Description. |
Other materials:
2wd. Preparation. Preparation
Preparation
Special Service Tool
Tool number
(TechMate No.)
Tool name Description
KV40104000
( – )
Hub lock nut wrench
a: 85 mm (3.35 in)
b: 65 mm (2.56 in)
Removing and Installing wheel hub lock nut.
KV40107300
( – )
Boot band crimping tool
Installing bo ...
P02cd Fuel Injector
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P02CD
00
CYL1 INJECTOR OFFSET LEARNING
(Cylinder 1 Fuel Injector "A" Offset Learning At Max Limit)
Diagnosis condition
Engine running
During injector ...
Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
(NI-39570)
Chassis ear
Locates the noise
(NI-50397)
Squeak and Rattle Kit
Repairs the cause o ...
