Nissan Rogue (T33) 2021-Present Service Manual: System Description :: Diagnosis System (air Bag Diagnosis Sensor Unit)

Nissan Rogue (T33) 2021-Present Service Manual / Restraints :: Srs Air Bag Control System / System Description :: Diagnosis System (air Bag Diagnosis Sensor Unit)

CONSULT Function

APPLICATION ITEM

CONSULT performs the following functions.

Diagnosis mode CGW Status Description
Restricted Mode Diag Test Mode Open Mode
Self Diagnostic Result Display Display Display Display non-network DTC which air bag diagnosis sensor unit memorizes
CGW Information Display Display Display

  • Display the current CGW mode

  • Enables CGW to switch mode
Data monitor Display Display Display This item is displayed, but cannot be supported.
ECU Identification Display Display Display Air bag diagnosis sensor unit part number is displayed.
TROUBLE DIAG RECORD Display Display Display With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation can be displayed on CONSULT screen.
Network-DTC* Display Display Display Display network DTC which air bag diagnosis sensor unit memorizes when performing "Diagnosis (All System)".

*: Displays when performing "Diagnosis (All System)".

SELF DIAGNOSTIC RESULT

Refer to DTC Index.

FREEZE FRAME DATA (FFD)

The air bag diagnosis sensor unit records the following vehicle condition at the time a particular DTC is detected, and displays on CONSULT.

CONSULT screen item Indication/Unit Description
ODO/TRIP METER km Total mileage (Odometer value) of the moment a particular DTC is detected.
DTC count count DTC detection number of times.

CGW INFORMATION

Display the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status from Restricted mode to Diag Test Mode/Open Mode.

For the method of switching CAN Gateway status. Refer to CONSULT Function.

    System Description. System
    Srs Air Bag Control System System Description SYSTEM DIAGRAM Component Function Occupant detection system sensor Refer to Occupant Detection System Sensor. Occupant detection sy...
    System Description. Diagnosis System (occupant Detection System Control Unit)
    CONSULT Function APPLICATION ITEMCONSULT performs the following functions. Diagnosis mode CGW Status Description Restricted Mode Diag Test Mode Open Mode CGW Information Display...

    Other materials:

    Information Display (combination Meter)
    Door Open Warning DESIGN/PURPOSEInformation display warns the driver that each door is open or is not fully closed. Symbol Message – SYNCHRONIZATION WITH MASTER WARNING LAMPSynchronization is applied.Refer to Master Warning Lamp.SYSTEM DIAGRAMSIGNAL PATH BCM transmits door switch ...

    U2454-87 Can Comm Circuit
    Without Propilot Assist 2.1 DTC Description CAN COMMUNICATIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Mode ...

    U2e52-87 Can Comm Circuit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition U2E52 87 CAN communication error (ADAS control unit) Diagnosis condition When ignition switch is ON. Signal (terminal) CAN communication signal Threshold Not receiving from ADAS c ...