Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2070-68 Key Registration
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC detecting condition | |
|---|---|---|---|
| B2070–68 |
Key registration (Key registration) |
Diagnosis condition | All time |
| Signal (terminal) | — | ||
| Threshold | Intelligent Key that does not match the Nissan Ariya vehicle is registered. | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
-
Improper registration operation
-
Intelligent Key
-
Intelligent Key unit
FAIL-SAFE
—
CONFIRMATION PROCEDURE
DTC CONFIRMATION
CONSULT
-
Perform initialization of Intelligent Key unit and registration of all Intelligent Keys.
-
Select “Self diagnosis result” mode of “INTELLIGENT KEY”.
Is the DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
REPLACE INTELLIGENT KEY
CONSULT
-
Replace Intelligent Key that matches the Nissan Ariya vehicle.
-
Perform initialization of Intelligent Key unit and registration of Intelligent Key.
Is the inspection result normal?
YES>>Inspection End.
NO>>GO TO 2.
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and Installation.
>>
Inspection End.
Other materials:
Troubleshooting guide
Verify the location of all Intelligent Keys
that are programmed for your Nissan Rogue. If
another Intelligent Key is within range or
inside the vehicle, the system may
respond differently than expected.
Symptom: When stopping the engine > The
Shift to P range warning appears on the
display and th ...
Remote engine start
Basic information
The remote engine start button is located on the Intelligent Key of the
Nissan Rogue, if equipped. This feature allows you to start the engine from outside
the vehicle, ensuring added comfort during hot or cold weather.
Some systems, including the air conditioning system, may ...
Removal and Installation. Parking Brake Switch
Removal and Installation
REMOVALRemove the console finisher assembly. Refer to Removal and Installation.
Remove parking brake mounting screws (A), and then remove parking brake switch (1).
: Console finisher assembly
NOTE:
The automatic brake hold switch and the rear parking brake s ...