Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2043-4a Electric Shift Id Discord
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC detecting condition | |
|---|---|---|---|
| B2043–4A |
Electric shift ID discord (Electric shift identification discord) |
Diagnosis condition | When registering electric shift control module |
| Signal (terminal) | CAN communication signal | ||
| Threshold | Electric shift control module registration has not been completed normally | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
Improper electric shift control module registration operation
FAIL-SAFE
Prohibit shifting the shift selector from P position
CONFIRMATION PROCEDURE
DTC CONFIRMATION
-
Ignition switch ON.
-
Select “Self diagnosis result” mode of “INTELLIGENT KEY”.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End.
DTC Diagnosis Procedure
REPLACE ELECTRIC SHIFT CONTROL MODULE
Replace electric shift control module. Refer to Removal and Installation (CVT: GE0F14A).
>>
Inspection End.
Other materials:
Type B. Symptom Diagnosis
Warning/indicator Lamp Remains on
Work Flow
The Fuel Gauge Indicator Does Not Operate
Description
Fuel gauge will not indicate from a certain position.
Diagnosis Procedure
CONDUCTING THE COMBINATION METER SELF-DIAGNOSIS MODE
Perform the self-diagnosis mode of combination meter, and then check ...
Automatic Emergency Braking. Symptom Diagnosis
Aeb System Symptoms
Symptom Table
CAUTION:
Before performing symptom-specific diagnosis, perform CONSULT self-diagnosis. If DTC is detected, perform DTC diagnosis first.
Symptom Confirmation item Reference page
AEB OFF warning lamp is blinking or illuminating
―
Refer to Symptom Des ...
P055f Engine Oil Pressure
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P055F
Engine oil pressure
(Engine oil pressure out of range)
Diagnosis condition
After ECM self shut-off.
Engine oil temperature is more than -10 ℃(14 ...
