Nissan Rogue (T33) 2021-Present Service Manual: Cvt: Ge0f14a :: Unit Disassembly and Assembly

Nissan Rogue (T33) 2021-Present Service Manual / Transmission & Driveline :: Transaxle & Transmission / Cvt: Ge0f14a :: Unit Disassembly and Assembly

Cvt: Ge0f14a. Unit Removal and Installation. Transaxle Assembly
Transaxle Assembly Exploded View 1. Transaxle assembly 2. CVT fluid charging pipe cap 3. CVT fluid charging pipe 4. O-ring         : N·m (kg-m, in-lb) : N·...
Torque Converter and Converter Housing Oil Seal
Exploded View 1. Torque converter 2. Converter housing oil seal 3. Transaxle assembly : Always replace after every disassembly. : Apply CVT fluid Disassembly Remove transaxle as...

Other materials:

Crankshaft Position Sensor
Component Inspection CHECK CRANKSHAFT POSITION SENSOR (POS)-1 Turn ignition switch OFF. Loosen the fixing bolt of the sensor. Disconnect crankshaft position sensor (POS) harness connector. Remove the sensor. Visually check the sensor for chipping. Is the inspection r ...

C1b8b-82 Hardware Network Seperator System
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1B8B 82 Power network separate relay Diagnosis condition When ignition switch is ON. Signal (terminal) CAN communication signal Threshold Power network separate relay is malfun ...

Basic Inspection. System Setting
Description The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure.×: ApplicableSetting ...