Nissan Rogue (T33) 2021-Present Service Manual: C1f80-83 Steering Wheel Touch Sensor

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Adas Control Unit :: Dtc/circuit Diagnosis / C1f80-83 Steering Wheel Touch Sensor

Without Propilot Assist 2.1

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
C1F80 83

Steering wheel touch sensor

(Steering wheel touch sensor) 		Diagnosis condition When engine is running
Signal (terminal) Steering wheel touch sensor status signal (LIN communication signal)
Threshold Receiving voltage error of steering wheel touch sensor
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

  • Steering wheel touch sensor

  • ADAS control unit 2

FAIL-SAFE

The following system are cancelled.

  • Vehicle-to-vehicle distance control mode

  • Steering wheel assistance function

  • Conventional (fixed speed) cruise control mode

  • FEB

  • RAB

  • PFCW

  • LDP

  • Blind Spot Intervention

  • TSR

  • DAA

CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine, and then wait for 2 seconds or more.

  2. Perform “All DTC Reading” with CONSULT.

  3. Check if the “C1F80-83” is detected as the current malfunction in self-diagnosis results of “ICC/ADAS 2”.

Is “C1F80-83” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

With Propilot Assist 2.1

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
C1F80 83

Steering wheel touch sensor

(Steering wheel touch sensor) 		Diagnosis condition When engine is running
Signal (terminal) Steering wheel touch sensor status signal (LIN communication signal)
Threshold Receiving voltage error of steering wheel touch sensor
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

  • Steering wheel touch sensor

  • ADAS control unit 2

FAIL-SAFE

The following system are cancelled.

  • Lane keep function*1

  • Lane keep function*2

  • Lane change support function

  • Overtaking support function

  • Route driving support function

*1: ProPILOT Assist 2.1 display is green

*2: ProPILOT Assist 2.1 display is blue

CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine, and then wait for 2 seconds or more.

  2. Perform “All DTC Reading” with CONSULT.

  3. Check if the “C1F80-83” is detected as the current malfunction in self-diagnosis results of “ICC/ADAS 2”.

Is “C1F80-83” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

REPLACE STEERING WHEEL

  1. Replace steering wheel. Refer to Removal and Installation.

  2. Perform confirmation procedure again. Refer to DTC Description (Without ProPILOT Assist 2.1) or DTC Description (With ProPILOT Assist 2.1).

Is “C1F80-83” detected as the current malfunction?

YES>>

Replace the ADAS control unit 2. Refer to Removal and Installation.

NO>>

INSPECTION END

    C1f80-82 Steering Wheel Touch Sensor
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1F80 82 Steering wheel touch sensor...
    C1f80-86 Steering Wheel Touch Sensor
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1F80 86 Steering wheel touch sensor...

    Other materials:

    Dtc/circuit Diagnosis. B1002-13 Lap Pre-Tensioner Rh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B1002-13 Lap pre-tensioner RH (Lap pre-tensioner right hand) Diagnosis condition When ignition switch is ON. Signal (terminal) Lap pre-tensioner RH signal ...

    Mac Key Writing
    Description When replacing around view monitor control unit, it is necessary to write MAC key to around view monitor control unit. Write MAC key to around view monitor control unit according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.CAUTION: During ...

    Dtc/circuit Diagnosis. U2141-87 Can Comm Circuit
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped ...