Nissan Rogue (T33) 2021-Present Service Manual: C1f64-83 Head up Display Unit

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Adas Control Unit :: Dtc/circuit Diagnosis / C1f64-83 Head up Display Unit

Without Propilot Assist 2.1

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
C1F64 83

Head Up Display unit

(Head Up Display unit) 		Diagnosis condition

  • When engine is running

  • When MAIN switch of ProPILOT Assist 1.1 system is ON
Signal (terminal) CAN communication signal
Threshold Signal receiving from Head Up Display unit via CAN communication is malfunction
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

  • Head Up Display unit

  • ADAS control unit 2

FAIL-SAFE

The following system are cancelled.

  • Vehicle-to-vehicle distance control mode

  • Steering wheel assistance function

  • Conventional (fixed speed) cruise control mode

  • FEB

  • RAB

  • PFCW

  • LDP

  • Blind Spot Intervention

  • TSR

  • DAA

CONFIRMATION PROCEDURE

CHECK DTC PRIORITY

If DTC “C1F64-83” is displayed with Network-DTC, first diagnose the Network-DTC.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable. Refer to DTC Index.

NO>>

GO TO 2.

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine.

  2. Turn the MAIN switch of ProPILOT Assist 1.1 system ON.

  3. Perform “All DTC Reading” with CONSULT.

  4. Check if the DTC “C1F64-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.

Is “C1F64-83” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

With Propilot Assist 2.1

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
C1F64 83

Head Up Display unit

(Head Up Display unit) 		Diagnosis condition

  • When engine is running

  • When MAIN switch of ProPILOT Assist 2.1 system is ON
Signal (terminal) CAN communication signal
Threshold Signal receiving from Head Up Display unit via CAN communication is malfunction
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

  • Head Up Display unit

  • ADAS control unit 2

FAIL-SAFE

The following system are cancelled.

  • Lane keep function*

  • Lane change support function

  • Overtaking support function

  • Route driving support function

*: ProPILOT Assist 2.1 display is blue

CONFIRMATION PROCEDURE

CHECK DTC PRIORITY

If DTC “C1F64-83” is displayed with Network-DTC, first diagnose the Network-DTC.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable. Refer to DTC Index.

NO>>

GO TO 2.

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine.

  2. Turn the MAIN switch of ProPILOT Assist 2.1 system ON.

  3. Perform “All DTC Reading” with CONSULT.

  4. Check if the DTC “C1F64-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.

Is “C1F64-83” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

CHECK DTC PRIORITY

If DTC “C1F64-83” is displayed with Network-DTC, first diagnose the Network-DTC.

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable. Refer to DTC Index.

NO>>

GO TO 2.

PERFORM SELF-DIAGNOSIS OF HEAD UP DISPLAY UNIT

Check if any DTC is detected in “Self Diagnostic Result” of “E-HUD”.

Is any DTC detected?

YES>>

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.

NO>>

Replace the ADAS control unit 2. Refer to Removal and Installation.

    C1f64-82 Head up Display Unit
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1F64 82 Head Up Display unit (Head ...
    C1f65-04 Sonar Control Unit
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition   C1F65 04 Sonar control unit (...

    Other materials:

    Door Lock Function
    System Description SYSTEM DIAGRAMDoor lock function controls operation function of the following items. Door lock and unlock function (door request switch) Selective unlock function (door request switch) Reminder function (door request switch) Auto door lock function (door request ...

    Brake fluid
    For more information on brake fluid type and capacity, refer to “Capacities and recommended fluids/lubricants”. WARNING Always use new brake fluid from a sealed container. Contaminated, old, or poor-quality fluid may damage the brake system and reduce stopping performance. Clean the filler c ...

    Dtc/circuit Diagnosis. C1731-16 Tire Pressure Sensor Fl
    DTC Description NOTE: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTCs ...