Nissan Rogue (T33) 2021-Present Service Manual: C1f51-83 Ipdm E/r
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F51 | 83 |
IPDM E/R (Intelligent power distribution module engine room) |
Diagnosis condition | When AEB system is ON |
| Signal (terminal) | — | |||
| Threshold | If IPDM E/R is malfunctioning | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
IPDM E/R
-
ADAS control unit 2
FAIL-SAFE
None
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F51-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Turn the AEB system ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F51-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F51-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F51 | 83 |
IPDM E/R (Intelligent power distribution module engine room) |
Diagnosis condition |
|
| Signal (terminal) | — | |||
| Threshold | If ADAS control unit 2 detects an error signal that is received from IPDM E/R via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
IPDM E/R
FAIL-SAFE
The following system are cancelled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
-
RAB
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F51-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Turn the FEB system ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F51-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F51-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F51-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM SELF-DIAGNOSIS OF IPDM E/R
Check if any DTC is detected in “Self Diagnostic Result” of “IPDM E/R”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
P02cd Fuel Injector
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P02CD
00
CYL1 INJECTOR OFFSET LEARNING
(Cylinder 1 Fuel Injector "A" Offset Learning At Max Limit)
Diagnosis condition
Engine running
During injector ...
B2231-16 Battery Voltage
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detected condition
B2231-16
Battery voltage
(Battery voltage)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Battery power supply
Threshold
8 V or le ...
Engine Stand Setting
Setting
NOTE:
Explained here is how to disassemble with engine stand
supporting transaxle surface. When using different type of engine stand,
note with difference in steps and etc.
Remove the engine and the transaxle assembly from the
vehicle, and separate the transaxle from the engine. Ref ...