Nissan Rogue (T33) 2021-Present Service Manual: C1f45-83 Ccm
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F45 | 83 |
CCM (Chassis control module) |
Diagnosis condition | When engine is running |
| Signal (terminal) | — | |||
| Threshold | ADAS control unit 2 detects that chassis control module has a malfunction. | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Chassis control module
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Vehicle-to-vehicle distance control mode
-
Conventional (fixed speed) cruise control mode
-
Steering wheel assistance function
-
LDW
-
BSW
-
RCTA
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F45-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Turn the ignition switch ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F45-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F45-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F45 | 83 |
CCM (Chassis control module) |
Diagnosis condition | When engine is running |
| Signal (terminal) | CAN communication signal | |||
| Threshold | If ADAS control unit 2 detects an error signal that is received from chassis control module via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Chassis control module
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Vehicle speed & vehicle-to-vehicle control function
-
Lane keep function*1
-
Lane keep function*2
-
Lane change support function
-
Overtaking support function
-
Route driving support function
-
FEB
-
RAB
-
PFCW
-
LDP
-
Blind Spot Intervention
-
TSR
*1: ProPILOT Assist 2.1 display is green
*2: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F45-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F45-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F45-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F45-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM SELF-DIAGNOSIS OF CHASSIS CONTROL MODULE
Check if any DTC is detected in “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
Dtc/circuit Diagnosis. B0028-09 Side A/b Module Rh
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B0028-09
SIDE A/B MODULE RH
(Right Side Airbag Deployment Control)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Front side air bag modu ...
U224a-87 Can Comm Err (awd/4wd)
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
U224A
87
CAN comm err (AWD/4WD)
[Controller area network communication error (AWD/4WD control unit)]
1
Diagnosis condition
When ignition switch is ON.
...
Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
Work Flow
CUSTOMER INTERVIEWInterview
the customer if possible, to determine the conditions that exist when
the noise occurs. Use the Diagnostic Worksheet during the interview to
document the facts and conditions when the noise occurs and any of
customer's comments; Refer to Diagnostic Work ...