Nissan Rogue (T33) 2021-Present Service Manual: C1f45-82 Ccm
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F45 | 82 |
CCM (Chassis control module) |
Diagnosis condition | When engine is running |
| Signal (terminal) | — | |||
| Threshold | ADAS control unit 2 detects that chassis control module has a malfunction. | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Chassis control module
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Vehicle-to-vehicle distance control mode
-
Conventional (fixed speed) cruise control mode
-
Steering wheel assistance function
-
LDW
-
BSW
-
RCTA
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F45-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Turn the ignition switch ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F45-82” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F45-82” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F45 | 82 |
CCM (Chassis control module) |
Diagnosis condition | When engine is running |
| Signal (terminal) | CAN communication signal | |||
| Threshold | If ADAS control unit 2 detects an error signal that is received from chassis control module via CAN communication | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Chassis control module
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Vehicle speed & vehicle-to-vehicle control function
-
Lane keep function*1
-
Lane keep function*2
-
Lane change support function
-
Overtaking support function
-
Route driving support function
-
FEB
-
RAB
-
PFCW
-
LDP
-
Blind Spot Intervention
-
TSR
*1: ProPILOT Assist 2.1 display is green
*2: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F45-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F45-82” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F45-82” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F45-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM SELF-DIAGNOSIS OF CHASSIS CONTROL MODULE
Check if any DTC is detected in “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
U2e52-87 Can Comm Circuit
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition
U2E52
87
CAN communication error (ADAS control unit)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
CAN communication signal
Threshold
Not receiving from ADAS c ...
Power Supply and Ground Circuit
Ecm
Diagnosis Procedure
CHECK THE BATTERY CABLE
Turn ignition switch OFF.
Check the battery cable for tightening enough.
NOTE:
Check the continuity between the battery cable and the battery terminal.
Is the inspection result normal?
YES>>
GO TO 2
...
Dtc/circuit Diagnosis. B1002-13 Lap Pre-Tensioner Rh
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B1002-13
Lap pre-tensioner RH
(Lap pre-tensioner right hand)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Lap pre-tensioner RH signal
...