The BSW system becomes active above approximately 20 MPH (32 km/h). When a vehicle enters the detection zone, the side indicator light turns on.
If the driver activates the turn signal, the system warns with two chimes and flashes both the side indicator light and the BSW display indicator. Flashing continues until the vehicle exits the detection zone.
The side indicator briefly lights up at ignition ON as a system check. Its brightness adjusts automatically depending on ambient lighting conditions.
Basic information
How to enable/disable the BSW systemP2014, P2016, P2017, P2018 intake manifold runner control
valve position sensor
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P2014
IN/MANIFOLD RUNNER POS SEN B1
(Intake manifold runner position sensor/
switch circuit bank 1)
An excessively low voltage from the sensor i ...
Outside mirrors
Outside mirrors
The outside mirror remote control will operate
only when the ignition switch is in the ACC or ON
position.
Move the small switch 1 to select the right or left
mirror. Adjust each mirror to the desired position
using the large switch 2 .
WARNING
Objects v ...
Third row seat
Exploded View
Seatback board (RH)
Seatback trim (RH)
Seatback pad (RH)
Seat cushion trim (RH)
Seat cushion pad (RH)
Seat cushion silencer (LH/RH)
Seat hinge finisher (RH)
Gas stay
Bolt cover (RH)
Seat belt buckle (RH)
Seat belt buckle (LH)
Bolt ...