Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Brakes

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide / Do-it-yourself / Brakes

Basic information

If the brakes on your Nissan Rogue do not operate correctly, it is recommended to have the system inspected by a NISSAN dealer.

Self-adjusting brakes

The vehicle uses self-adjusting disc brakes, which adjust automatically each time the brake pedal is pressed.

WARNING

Have the brake system checked if the brake pedal height does not return to normal. It is recommended you visit a NISSAN dealer for this service.

Brake pad wear warning

The disc brake pads include an audible warning indicator. When pads require replacement, a high-pitched scraping noise may be heard while the Nissan Rogue is moving. At first, the noise appears only during braking; later, it may occur even without pressing the pedal.

Occasional brake squeal or noise can occur depending on driving or climate conditions and does not necessarily indicate a malfunction.

Follow the recommended brake inspection intervals described in the “Maintenance and schedules” section.

    Windshield wiper blades
    Cleaning Basic information If the windshield of your Nissan Rogue remains unclear after using the washer, or if the wiper blades chatter, wax or debris may be present on the gla...
    Fuses
    Engine compartment Basic information WARNING Never use fuses with a different amperage rating from what is specified on the fuse box cover. Doing so may damage the electrical sy...

    Other materials:

    Dtc/circuit Diagnosis. C1700-86 Control Unit
    DTC Description NOTE: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTCs ...

    Entretien général
    Informations de base Lors de l’utilisation normale de votre Nissan Rogue, les opérations d’entretien général doivent être réalisées régulièrement et avec rigueur, conformément aux instructions décrites dans cette section. Toute apparition de bruits anormaux, de vibrations inhabituelle ...

    Dtc/circuit Diagnosis. Parking Brake Switch
    Component Inspection CHECK PARKING BRAKE SWITCH Disconnect the 12V battery negative terminal. Disconnect the parking brake switch harness connector. Check the continuity when parking brake switch is operated. Parking brake switch Continuity Condition Terminals When parking ...