Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Additional Service When Replacing Electrically-Driven Intelligent Brake Unit

Nissan Rogue (T33) 2021-Present Service Manual / Brakes :: Brake System / Basic Inspection :: Additional Service When Replacing Electrically-Driven Intelligent Brake Unit

Work Procedure

Vehicle specification needs to be written with CONSULT because it is not written after replacing the Electrically-driven Intelligent Brake Unit.

For details the operation, refer to “CONSULT Operation Manual”.

Work Procedure (After Replace Electrically-Driven Intelligent Brake Unit)

WRITING VEHICLE SPECIFICATION

CONSULT

Perform writing Nissan Ariya vehicle specification to Electrically-driven Intelligent Brake Unit according to "Replace ECU" in CONSULT Operation Manual.

>>

GO TO 2.

PERFORM NECESSARY WORK

CONSULT

  1. Perform air bleeding. Refer to Bleeding Brake System.

  2. Perform self-diagnosis for “All DTC Reading”.

  3. Erase the memory of self-diagnosis results.

>>

WORK END

    Basic Inspection. Diagnosis and Repair Work Flow
    Work Flow DETAILS OF TROUBLE DIAGNOSIS FLOWCHARTCOLLECT THE INFORMATION FROM THE CUSTOMER It is also important to clarify customer concerns before starting the inspection. First...
    Basic Inspection. Front Disc Brake. Disc Rotor
    Disc Rotor Inspection INSPECTIONUneven wearCheck the uneven wear of the disc rotor using a micrometer. Replace the disc rotor if the thickness is below the wear limit. For 2WD: ...

    Other materials:

    Drive Belt Auto Tensioner and Idler Pulley
    With Idle Start/stop System Exploded View 1. Drive belt auto-tensioner — — — — Removal and Installation REMOVALRemove the wheel and tire (front RH). Refer to Removal & Installation. Remove the splash guard (front RH). Refer to Exploded View. Remove the fr ...

    P1574 Ascd Vehicle Speed Sensor
    DTC Description DESCRIPTIONThe ECM receives two vehicle speed sensor signals via CAN communication line. One is sent from VDC (Nissan Ariya vehicle dynamics control), and the other is from TCM (Transmission control module). The ECM uses these signals for ASCD control. Refer to System Descri ...

    Dtc/circuit Diagnosis. U0075-00 Communication Bus C Off
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U0075-00 Control module comm Bus C Off (Control module communication Bus C Off) Diagnosis condition Ignition switch ON Signal (terminal) CAN communication s ...