Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Additional Service When Replacing Bcm

Nissan Rogue (T33) 2021-Present Service Manual / Suspension :: Road Wheels & Tires / Basic Inspection :: Additional Service When Replacing Bcm

Work Procedure

ADDITIONAL SERVICE WHEN REPLACING BCM

Perform additional service when replacing BCM. Refer to Description.

>>

GO TO 2.

PERFORM TIRE PRESSURE SENSOR ID REGISTRATION

Perform tire pressure sensor ID registration. Refer to Description.

>>

WORK END

    Basic Inspection. Diagnosis and Repair Work Flow
    Work Flow OVERALL SEQUENCEDETAILED FLOWINTERVIEW FROM THE CUSTOMER Clarify customer complaints before inspection. To do so, reproduce the symptom before hand and fully understan...
    Basic Inspection. Tire Pressure Sensor Id Registration
    Description This procedure must be performed. After replacement of a tire pressure sensor or BCM. After replacement of tire or road wheel. NOTE: ID registration is unnecessary i...

    Other materials:

    With Idle Start/stop. System Description
    Component Parts Component Parts Location No. Component Function 1. Sub starter & generator Refer to Sub starter & generator. 2. Battery current sensor (with battery temperature sensor) Refer to 12V Battery Current Sensor . 3. ECM (Engine Control Module The ...

    B20dd-73 Ign Relay on Circ
    DTC Description IPDM E/R operates the ignition relay when it receives an ignition ON signal from BCM via CAN communication. Turn the ignition relay OFF by pressing the push-button ignition switch once when the Nissan Ariya vehicle speed is 2.5 MPH (4 km/h) or less. Turn the igniti ...

    P0500 Vss
    DTC Description DESCRIPTIONECM receives vehicle speed signals from two different paths via CAN communication line: One is from the ABS actuator and electric unit (control unit) via the combination unit and the other is from TCM.DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagno ...