Nissan Rogue (T33) 2021-Present Service Manual: B2223-1c Combination Meter

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)
DTC detected condition
B2223-1C

Combination meter

(Combination meter)
Diagnosis condition When ignition switch is ON.
Signal (terminal)
Threshold TFT error is detected
Diagnosis delay time

POSSIBLE CAUSE

Combination meter

FAIL-SAFE

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON and wait for 2 seconds or more.

  2. Select “Self diagnosis result” mode of “M&A”.

  3. Check DTC.

Is DTC B2223-1C detected?

YES>>

Refer to Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair:Inspection End.

Diagnosis Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON.

  2. Erase the self diagnosis result.

  3. Perform DTC confirmation procedure. Refer to DTC Description.

Is DTC detected?

YES>>

Replace combination meter. Refer to Removal and Installation.

NO>>

Inspection End.

    B220a-11 Combination Meter
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B220A-11 Combination meter (Combination meter) Diagnosis cond...
    B2231-16 Battery Voltage
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2231-16 Battery voltage (Battery voltage) Diagnosis conditio...

    Other materials:

    Drive Pinion
    Exploded View Companion flange lock nut Companion flange Electro-hydraulic coupling oil seal Electro-hydraulic coupling assembly O-ring Actuator assembly O-ring Drive pinion oil seal Drive pinion lock nut Pinion front bearing Gasket Dr ...

    Forward-facing child restraint installation using LATCH
    Basic information For proper installation of a forward-facing child restraint in your Nissan Rogue, carefully review all Warnings and Cautions in the “Child safety” and “Child restraints” sections before beginning. Do not use the lower anchors if the combined weight of the child and res ...

    Oil Level Sensor Signal Circuit
    DiagnosisProcedure CHECK OIL LEVEL SENSOR CIRCUIT Ignition switch OFF. Disconnect combination meter harness connector and oil level sensor harness connector. Check continuity between combination meter harness connector and oil level sensor harness connector. Combination meter Oi ...