Nissan Rogue (T33) 2021-2026 Manuel du Conducteur: Avertissement d'angle mort (BSW)
- Informations de base
- Fonctionnement du système BSW
- Situations de conduite du système BSW
- Système temporairement indisponible
Other materials:
Periodic Maintenance. Wheel Alignment
Inspection
DESCRIPTIONCAUTION:
The adjustment mechanisms of camber, caster, and kingpin inclination angles are not included.
If camber, caster, or kingpin inclination angle exceeds the standard
value, check front suspension parts for wear and damage. Replace suspect
parts if a malfunc ...
C1b80-54 Control Module
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition
C1B80
54
Calibration not completed
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
-
Threshold
When calibration is not complete.
Diagnosis delay time
1 ...
Crankshaft Position Sensor
Component Inspection
CHECK CRANKSHAFT POSITION SENSOR (POS)-1
Turn ignition switch OFF.
Loosen the fixing bolt of the sensor.
Disconnect crankshaft position sensor (POS) harness connector.
Remove the sensor.
Visually check the sensor for chipping.
Is the inspection r ...