Nissan Rogue (T33) 2021-Present Service Manual: 2wd :: Preparation. Preparation
Preparation
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Ball joint remover |
|
Removing hub bolt |
Always Replace with New Parts
| Never Reuse These Parts | Part Code | For additional information |
|---|---|---|
| Bush - Radius, Axle | 43052H | Exploded View |
| Bush - LWR Link, FR Axle | 43052D | Exploded View |
| Bush - LWR Link, RR Axle | 43052E | Exploded View |
| Bolt - Hub | 43222 | Exploded View |
Other materials:
P161d Immobilizer
DTC Description
DTC DETECTION LOGICNOTE:
DTC P161D is displayed with another ECU.
Perform the trouble diagnosis for the corresponding DTC of another ECU. Refer to DTC Description.
POSSIBLE CAUSE
ECM
Intelligent Key unit
Electric shift control module
Power steering control modul ...
Motion-activated liftgate
Basic information
The Nissan Rogue liftgate can be opened using a quick forward kicking motion beneath the center area of the rear bumper.
The kick motion sensor a is located behind the bumper. When your foot moves under and away from the detection area b while carrying the Intelligent Key, ...
Oil Level Sensor Signal Circuit
DiagnosisProcedure
CHECK OIL LEVEL SENSOR CIRCUIT
Ignition switch OFF.
Disconnect combination meter harness connector and oil level sensor harness connector.
Check continuity between combination meter harness connector and oil level sensor harness connector.
Combination meter
Oi ...

