Nissan Rogue (T33) 2021-Present Service Manual: Led Headlamp :: Wiring Diagram

Nissan Rogue (T33) 2021-Present Service Manual / Driver Controls :: Exterior Lighting System / Led Headlamp :: Wiring Diagram

Headlamp

Wiring Diagram

Refer to Wiring Diagram.

Daytime Running Light System

Wiring Diagram

Refer to Wiring Diagram.

Intelligent Auto Light System-With Type a Meter

Wiring Diagram

Refer to Wiring Diagram.

Intelligent Auto Light System-With Type B Meter

Wiring Diagram

Refer to Wiring Diagram.

Turn Signal and Hazard Warning Lamp-With Type a Meter

Wiring Diagram

Refer to Wiring Diagram.

Turn Signal and Hazard Warning Lamp-With Type B Meter

Wiring Diagram

Refer to Wiring Diagram.

Parking, License Plate, Side Marker and Tail Lamp-With Type a Meter

Wiring Diagram

Refer to Wiring Diagram.

Parking, License Plate, Side Marker and Tail Lamp-With Type B Meter

Wiring Diagram

Refer to Wiring Diagram.

Stop Lamp-With Propilot Assist 2.1

Wiring Diagram

Refer to Wiring Diagram.

Stop Lamp-Without Propilot Assist 2.1

Wiring Diagram

Refer to Wiring Diagram.

Back-Up Lamp

Wiring Diagram

Refer to Wiring Diagram.

    Led Headlamp. Ecu Diagnosis Information. Bcm, Ipdm E/r
    Bcm, Ipdm E/r List of ECU Reference ECU Reference BCM Reference Value (With Type A Meter) or Reference Value (With Type B Meter) Fail-safe DTC Inspection Priority Chart DTC Inde...
    Led Headlamp. Basic Inspection
    Diagnosis and Repair Work Flow Work Flow OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and...

    Other materials:

    P11a1 Vcr Motor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P11A1 00 VCR motor (Variable compression ratio motor) Diagnosis condition Engine running at idle Engine speed : 4,500 rpm or more Signal (termina ...

    C1f40-04 Ecm
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition   C1F40 04 ECM (Engine control module) Diagnosis condition When AEB system is ON Signal (terminal) — Threshold ...

    Basic Inspection. Mac Key Writing
    Description When replacing BCM, it is necessary to write MAC key to BCM. Write MAC key to BCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.CAUTION: During MAC key writing, maintain the following conditions: Ignition switch ON CONSULT ...