Nissan Rogue Service Manual: Removal and installation

Periodic maintenance

FUEL SYSTEM Inspection Inspect fuel lines, fuel filler cap, and fuel tank for improper attachment, leaks, cracks, damage, loose connections, chafing or deterioration. (A) : Engine (B) : Fuel ...

Fuel level sensor unit, fuel filter and fuel pump assembly

Exploded View 1. Lock ring 2. O-ring 3. Fuel filter and fuel pump assembly 4. Fuel level sensor and fuel tank temperature sensor 5. Lock ring 6. O-ring 7. Sub fuel level sensor assembly ...

Other materials:

Moonroof does not operate properly
Diagnosis Procedure 1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-68, "Diagnosis Procedure" (with Intelligent Key System), BCS-128, "Diagnosis Procedure" (without Intelligent Key System) Is the inspection result norm ...

C1735 ignition signal
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

Mixture ratio self-learning value clear
Description This describes how to erase the mixture ratio self-learning value. For the actual procedure, follow the instructions in “Diagnosis Procedure”. Work Procedure 1.START With CONSULT  Start engine and warm it up to normal operating temperature.  Select “SELF-LEA ...