Nissan Rogue manuals

Nissan Rogue Owners Manual: Bluetooth® streaming audio with Navigation System

If you have a compatible Bluetooth® audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play through the vehicle’s speakers.

Connecting Bluetooth® audio

Connecting Bluetooth® audio

To connect your Bluetooth® audio device to the vehicle, follow the procedure below:

  1.  Press the [ ] button.
  2.  Touch the “Settings” key.
  3.  Touch the “Phone & Bluetooth” key.

Connecting Bluetooth® audio

  1. Touch the “Connect New Device” key.
  2.  The system acknowledges the command and asks you to initiate connecting from the phone handset. The connecting procedure of the cellular phone varies according to each cellular phone model. For additional information, refer to the cellular phone Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth or www.nissan.ca.com/bluetooth for instructions on connecting NISSAN recommended cellular phones.

Audio main operation

To switch to the Bluetooth® audio mode, press the AUX button repeatedly until the Bluetooth® audio mode is displayed on the screen.

The controls for the Bluetooth® audio are displayed on the screen.

Bluetooth® streaming audio without Navigation System (if so equipped)
If you have a compatible Bluetooth® audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play thr ...

CD care and cleaning
Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc.  Always place the discs in the storage case when they are not being used.  To clean a disc ...

Other materials:

System description
COMPONENT PARTS Component Parts Location Instrument lower panel LH Rear final drive assembly Rear wheel house outer panel in luggage room of left side No. Component Function 1 Combination meter Mainly transmits the following signals to AWD control unit ...

Connecting Procedure
Connecting Procedure NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled.  Press the [ ] button on the control panel.  Touch the “Settings” key.  T ...

Periodic maintenance
REAR PROPELLER SHAFT Inspection APPEARANCE AND NOISE  Check the propeller shaft tube surface for dents or cracks. If malfunction is detected, replace propeller shaft assembly.  If center bearing is noisy or damaged, replace propeller shaft assembly. VIBRATION If vibrati ...

© 2014-2019 Copyright www.nirogue.com