Nissan Rogue (T33) 2021-Present Service Manual: Wiring Diagram :: Bcm

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / Wiring Diagram :: Bcm

Wiring Diagram (With Type A Meter)

Refer to Wiring Diagram.

Wiring Diagram (With Type B Meter)

Refer to Wiring Diagram.

    Ecu Diagnosis Information. Bcm
    Values on the Diagnosis Tool NOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle...
    Basic Inspection. Additional Service When Replacing Bcm
    Description CAUTION: When replacing the BCM, always replace it with a new one. The functions controlled by the BCM may not operate properly in case of reuse of the BCM from anot...

    Other materials:

    B261e-56 Pairing Error
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detected condition B261E-56 Pairing error Diagnosis condition When ignition switch is ON. Signal (terminal) — Threshold HFM pairing not performed Diagnosis delay time 10 seconds or more ...

    Symptom Diagnosis. Srs Air Bag Warning Lamp Does Not Turn on
    Diagnosis Procedure CHECK DTC WITH AIR BAG DIAGNOSIS SENSOR UNIT Check that DTC is not detected with air bag diagnosis sensor unit. Is the inspection result normal? YES>> GO TO 2. NO>> Refer to DTC Index. CHECK DTC WITH COMBINATION METER Check that DTC is not detected with com ...

    Awd. Preparation. Preparation
    Preparation Special Service Tool Tool number Tool name Description KV40104000 Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) Removing and Installing wheel hub lock nut. KV40107310 Boot band crimping tool Installing boot band KV40107300 Boot ban ...