Nissan Rogue (T33) 2021-Present Service Manual: U244f-57 Mac Comm Error (bcm)

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Adas Control Unit :: Dtc/circuit Diagnosis / U244f-57 Mac Comm Error (bcm)

Without Propilot Assist 2.1

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
U244F 57

CAN comm err (BCM)

[Controller area network communication error (Body control module)] 		Diagnosis condition —
Signal (terminal) —
Threshold MAC communication error
Diagnosis delay time —

POSSIBLE CAUSE

  • MAC communication error

  • ADAS control unit 2used in other vehicles is installed in the Nissan Ariya vehicle

  • ADAS control unit 2

  • BCM

FAIL-SAFE

The following systems are canceled.

  • Vehicle-to-vehicle distance control mode

  • Conventional (fixed speed) cruise control mode

  • Steering wheel assistance function

  • AEB

  • RAB

  • I-FCW

  • LDW

  • I-LI

  • BSW

  • I-BSI

  • RCTA

  • TSR

  • I-DA

CONFIRMATION PROCEDURE

CHECK DTC PRIORITY

If DTC “U244F-57” is displayed with DTC “U1327-52” or “U1327-54”, first perform the trouble diagnosis for DTC “U1327-52” or “U1327-54”.

Is DTC “U1327-52” or “U1327-54” detected?

YES>>

Perform diagnosis of applicable. Refer to the following.

  • U1327-52: DTC Description

  • U1327-54: DTC Description

NO>>

GO TO 2.

CHECK MAC DIAGNOSIS

With CONSULT

  1. Ignition switch ON.

  2. Perform “MAC Diagnosis” mode of “ICC/ADAS 2” using CONSULT.

Is DTC “U244F-57” detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

With Propilot Assist 2.1

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
 
U244F 57 CAN communication error (BCM) Diagnosis condition —
Signal (terminal) —
Threshold MAC communication error
Diagnosis delay time —

POSSIBLE CAUSE

  • MAC communication error

  • ADAS control unit 2used in other vehicles is installed in the Nissan Ariya vehicle

  • ADAS control unit 2

  • BCM

FAIL-SAFE

The following systems are canceled.

  • Vehicle speed & vehicle-to-vehicle control function

  • Lane keep function*1

  • Lane keep function*2

  • Lane change support function

  • Overtaking support function

  • Route driving support function

  • FEB

  • RAB

  • PFCW

  • LDP

  • Blind Spot Intervention

  • TSR

  • DAA

*1: ProPILOT Assist 2.1 display is green

*2: ProPILOT Assist 2.1 display is blue

CONFIRMATION PROCEDURE

CHECK DTC PRIORITY

If DTC “U244F-57” is displayed with DTC “U1327-52” or “U1327-54”, first perform the trouble diagnosis for DTC “U1327-52” or “U1327-54”.

Is DTC “U1327-52” or “U1327-54” detected?

YES>>

Perform diagnosis of applicable. Refer to the following.

  • U1327-52: DTC Description

  • U1327-54: DTC Description

NO>>

GO TO 2.

CHECK MAC DIAGNOSIS

With CONSULT

  1. Ignition switch ON.

  2. Perform “MAC Diagnosis” mode of “ICC/ADAS 2” using CONSULT.

Is DTC “U244F-57” detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

CHECK DTC PRIORITY

If DTC “U244F-57” is displayed with DTC “U1327-52” or “U1327-54”, first perform the trouble diagnosis for DTC “U1327-52” or “U1327-54”.

Is DTC “U1327-52” or “U1327-54” detected?

YES>>

Perform diagnosis of applicable. Refer to the following.

  • U1327-52: DTC Description

  • U1327-54: DTC Description

NO>>

GO TO 2.

CHECK MAC DIAGNOSIS

With CONSULT

Perform “MAC Diagnosis” mode of “ICC/ADAS 2” using CONSULT.

Is DTC “U244F-57” detected with DTC “U214F-57”, “U2175-57” (with around view monitor control unit), “U2176-57”, “U2440-57”, “U2465-57” (with sonar system) and “U2476-57” at the same time?

YES (all DTC codes are detected at the same time)>>

Replace the ADAS control unit 2. Refer to Removal and Installation.

NO (all DTC codes are not detected at the same time)>>

GO TO 3.

CHECK CAN DIAGNOSIS

With CONSULT

Perform "CAN Diag".

Is the inspection result normal?

YES>>

Contact Techline and report the Nissan Ariya vehicle condition.

NO>>

Repair or replace root cause.

    U244e-87 Can Comm Circuit
    Without Propilot Assist 2.1 DTC Description CAN COMMUNICATIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya ve...
    U244f-87 Can Comm Circuit
    Without Propilot Assist 2.1 DTC Description CAN COMMUNICATIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya ve...

    Other materials:

    Automatic air conditioner (models without rear control)
    Models with heated steering wheel Models without heated steering wheel Basic information Temperature control dial (driver's side) AUTO button Display screen SYNC button Temperature control dial (passenger's side) ON·OFF button Air recirculation button Fan speed buttons Air flow ...

    U216e-87 Can Comm Circuit
    DTC Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-Nissan Ariya vehicle multiplex communication system with high data communication speed and excellent error detectability. Many electronic control units are equipped onto Nis ...

    Brake assist
    Brake assist When brake pedal force exceeds a certain threshold, Brake Assist activates to provide greater braking force than a conventional brake booster, even with relatively light pedal pressure. WARNING Brake Assist supports braking but does not replace careful driving. It is not a collision wa ...