Nissan Rogue (T33) 2021-Present Service Manual: U19c8-87 Ethernet Circuit

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Adas Control Unit :: Dtc/circuit Diagnosis / U19c8-87 Ethernet Circuit

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
U19C8 87 Ethernet communication error (Front camera) Diagnosis condition When engine is running
Signal (terminal) Ethernet communication
Threshold If ADAS control unit 2 is not receiving ethernet communication signal
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

  • Ethernet harness

  • ADAS control unit 2

  • Front camera unit

FAIL-SAFE

The following systems are canceled.

  • Lane keep function*1

  • Lane keep function*2

  • Lane change support function

  • Overtaking support function

  • Route driving support function

  • FEB

  • RAB

  • PFCW

  • LDP

  • Blind Spot Intervention

  • TSR

*1: ProPILOT Assist 2.1 display is green

*2: ProPILOT Assist 2.1 display is blue

CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine, and then wait for 2 seconds or more.

  2. Perform “All DTC Reading” with CONSULT.

  3. Check if the “U19C8-87” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.

Is “U19C8-87” detected as the current malfunction?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

CHECK CONSULT DISPLAY FRONT CAMERA UNIT

  1. Perform “All DTC Reading” with CONSULT.

  2. Check if the item of “LANE CAMERA” is displayed in “All DTC Reading”.

Is “LANE CAMERA” displayed?

YES>>

GO TO 2.

NO>>

Check power supply and ground circuit of front camera unit. Refer to Diagnosis Procedure.

PERFORM SELF-DIAGNOSIS OF FRONT CAMERA UNIT

Check if any DTC is detected in “Self Diagnostic Result” of “LANE CAMERA”.

Is any DTC detected?

YES>>

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.

NO>>

GO TO 3.

CHECK ETHERNET CABLE

  1. Turn the ignition switch OFF.

  2. Check the Ethernet cable of ADAS control unit 2 and front camera unit for disconnection, bending, and poor fitting.

Is the inspection result normal?

YES>>

Replace front camera unit. Refer to Removal and Installation.

NO>>

Replace ethernet cable.

    U19c7-87 Ethernet Circuit
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U19C7 87 Ethernet communication error (HD map module) Diagnosis ...
    U19c9-87 Can Comm Circuit
    DTC Description CAN COMMUNICATIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communicatio...

    Other materials:

    Cvt: Ge0f14a. Symptom Diagnosis
    Cvt Control System Symptom Table The diagnosis item number indicates the order of check. Start checking in the order from 1. Perform diagnoses of symptom table 1 before symptom table 2. Symptom Table 1 Diagnostic item Reference Symptom Shift Shock Slips/Will Not Engage Other ...

    U2b8c-88 Ethernet Circuit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detected condition U2B8C-88 Ethernet circuit Diagnosis condition When ignition switch is ON. Signal (terminal) — Threshold Lost ethernet communication with driving video recorder control module ...

    Preparation
    Special Service Tools The actual shapes of TechMate tools may differ from those of special service tools illustrated here. Tool number (TechMate No.) Tool name Description (NI-39570) Chassis ear Locates the noise (NI-50397) Squeak and Rattle Kit Repairs the cause o ...