Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: System temporarily unavailable
Condition A:
The Intelligent Lane Intervention system on the Nissan Rogue may stop providing its warning or assist actions in certain driving situations. These temporary conditions do not indicate a malfunction.
- When the turn signal is activated and the Nissan Rogue changes lanes in that direction. The system pauses for about 2 seconds after the signal is turned off.
- When vehicle speed drops below roughly 37 MPH (60 km/h).
Action to take:
Once normal conditions return and speed increases, the warning and assist features reactivate automatically.
Condition B:
Under the following conditions, the Nissan Rogue will still display lane warnings, but steering assist will not activate:
- Heavy braking or strong deceleration.
- Large steering inputs, such as during lane changes.
- Accelerating while the I-LI system is attempting to assist.
- When the Intelligent Cruise Control (ICC) approach warning activates.
- When hazard lights are turned on.
- Driving quickly through sharp curves.
- When the “Unavailable Slippery Road” condition triggers because VDC or ABS is active.
Action to take:
After these conditions pass, assist function returns once the required operating conditions are met.
Condition C:
The Nissan Rogue may automatically turn off the I-LI system when the following messages appear:
- “Currently Unavailable”:
- Vehicle Dynamic Control (VDC) is switched off.
- SNOW or OFF-ROAD mode is active (AWD only).
- “Unavailable Slippery Road”:
- When VDC (except traction function) or ABS is operating.
Action to take:
When these conditions end, switch off the I-LI system, then press the ProPILOT Assist button again to reactivate it.
High-temperature temporary disable:
If the Nissan Rogue is exposed to direct sunlight and the cabin temperature exceeds ~104°F (40°C), the system may shut down automatically and display:
- “Unavailable Camera Temperature High”
Allow the cabin to cool, turn the I-LI system off, then press the ProPILOT Assist switch again to restore functionality.
I-LI system limitations
WARNING
The I-LI system is assistance only. It may not detect all lane markers, weather conditions, or road shapes. Relying on it in these cases can be dangerous.
I-LI may activate when changing la ...
System malfunction
If a malfunction occurs, the I-LI system turns off automatically, the orange indicator illuminates, and a chime sounds. The message “Malfunction See Owner’s Manual” appears.
Action to take:
Saf ...
Other materials:
Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
—
(1-20-2721-1-IF)
Distance Sensor Ali ...
Component parts
Component Parts Location
Combination meter
Engine room right side
Engine room left side
No.
Component part
Description
1
Combination meter (Charge warning lamp)
The IC regulator warning function activates to illuminate the charge
warning
...
B1430 seat belt pre-tensioner
DTC Logic
DTC DETECTION LOGIC
CONSULT name
DTC
DTC detecting condition
Repair order
FRONT PRE-TEN LH CIRCUIT
[OPEN]
B1430
Front LH seat belt pre-tensioner circuit is
open.
Refer to SRC-59, "Diagnosis Procedure".
FRONT PRE-T ...
