Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

— (J-46534) Trim Tool Set

Removing trim components
— (1-20-2721-1-IF) Distance Sensor Alignment Kit

Adjusting distance sensor
— (1-20-2722-1-IF) Wheel Adapter

Adjusting distance sensor
— (J-50808) Distance Sensor Alignment Attachment Board

Adjusting distance sensor
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
COMPONENT PARTS Component Parts Location View with back door finisher removed View with glove box assembly removed  View with front bumper removed  View with front bumper remo ...

Other materials:

Vehicle identification
Vehicle identification number (VIN) plate The vehicle identification number (VIN) plate is located as shown. This number is the identification for your vehicle and is used in the vehicle registration. The VIN number is also available through the center display screen. For additional inf ...

Symptom diagnosis
PUSH-BUTTON IGNITION SWITCH DOES NOT OPERATE Description Check that vehicle Operating Conditions are as listed in “Conditions of Vehicle” below before starting Diagnosis Procedure. Make sure to check each symptom in Diagnosis Procedure. NOTE: The engine start function, door lock functio ...

ECU diagnosis information
TCM Reference Value CONSULT DATA MONITOR STANDARD VALUE  In CONSULT, electric shift timing or lock-up timing, i.e. operation timing of each solenoid valve, is displayed. Therefore, if there is an obvious difference between the shift timing estimated from a shift shock (or engine ...

© 2014-2025 Copyright www.nirogue.com