Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: System malfunction
If a malfunction occurs, the BSW system turns off, its indicator lights up, and “Malfunction See Owner’s Manual” appears on the display.
When BSW stops functioning, the I-BSI and RCTA systems also stop.
Action to take: Stop safely, turn the engine off, restart the vehicle. If the message persists, have the system inspected by a NISSAN dealer.
System temporarily unavailable
If radar blockage is detected, the Blind Spot Warning system turns off automatically, a chime sounds, and the “Unavailable Side Radar Obstruction” message appears on the display.
The system remai ...
System maintenance
Basic information
The two radar sensors A for the Blind Spot Warning system are installed near the rear bumper of the Nissan Rogue.
Keep the area around the sensors clean to ensure proper system ...
Other materials:
U1000 CAN COMM circuit
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT
Detection Condition
Possible Cause
U1000
CAN COMM CIRC
[U1000]
When combination meter is not transmitting or receiving CAN
communication signals for 2 seconds or more.
CAN communication system
D ...
Removal and installation
NATS ANTENNA AMP.
Exploded View
Instrument finisher B
Push button ignition switch
NATS antenna amp.
Pawl
Removal and Installation
REMOVAL
Remove the instrument finisher B. Refer to IP-16, "INSTRUMENT
FINISHER B : Removal and Installation".
Release ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
...
