Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: P Range Interlock Door Unlock Function Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / Symptom Diagnosis :: P Range Interlock Door Unlock Function Does Not Operate

Diagnosis Procedure

CHECK “AUTO DOOR UNLOCK” SETTING IN COMBINATION METER

Check “Auto Door Unlock” setting is “Shift to P”

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Set “Shift to P” in combination meter.

REPLACE BCM

  1. Replace BCM. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Key Reminder Function Does Not Operate
    Diagnosis Procedure CHECK DOOR SWITCH Check door switch. Refer to Component Function Check. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replac...
    Symptom Diagnosis. Reminder Function Does Not Operate
    Door Request Switch Description Reminder function does not operate using door request switch. Diagnosis Procedure CHECK “ANSWER BACK” SETTING IN “WORK SUPPORTS” CONSULT ...

    Other materials:

    Dtc/circuit Diagnosis. Thigh Support Motor
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Thigh support motor” in “Active test” mode of “DRIVER SEAT”. Check thigh support motor LH operation. Test item Operation Thigh support motor Up Thigh support Upward Down ...

    B2730-13 Side Sensor [rl]
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen items (Trouble diagnosis content) DTC detection condition B2730-13 SIDE SENSOR [RL] (Side sensor [RL]) Diagnosis condition When ignition switch is ON Signal (terminal) Rear sonar sensor signal LH side Threshold H ...

    U2e52-87 Can Comm Circuit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition U2E52 87 CAN communication error (ADAS control unit) Diagnosis condition When ignition switch is ON. Signal (terminal) CAN communication signal Threshold Not receiving from ADAS c ...