Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Intelligent Key Button Operation Has Poor Range (one Key)
Description
Intelligent Key button operation has poor range. (One Intelligent Key has the symptom, other keys operate normally.)
SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY)
| Door lock operation (remote keyless entry) | Door lock operation (request switch of front/rear/back door) or trunk/back door open operation (opener switch of trunk/back door panel) | Engine started with push-button ignition switch operation (Intelligent Key is within the detection area of inside key antenna) | Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch) | Unlock operation when approaching the Nissan Ariya vehicle, lock operation when away from the vehicle (registered Intelligent Key is within the detection area of outside key antenna) |
|---|---|---|---|---|
| Poor range | OK | OK | OK | OK |
DIAGNOSIS PROCEDURE
Refer to Diagnosis Procedure.
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO 2.
CHECK INTELLIGENT KEY LOW BATTERY WARNING
Check that the Intelligent Key low battery warning operates.
Is the Intelligent Key low battery warning operated?
YES>>Replace Intelligent Key battery. Refer to Removal and Installation.
NO>>GO TO 3.
CHECK INTELLIGENT KEY BATTERY
Check the Intelligent Key battery. Refer to Component Inspection.
Is the inspection result normal?
YES>>Replace Intelligent Key and register new Intelligent Key.
NO>>Replace Intelligent Key battery. Refer to Removal and Installation.
Other materials:
U2150 Can Comm Circuit
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
U2150
83
CAN comm err (AIRBAG)
[CAN comm err (AIRBAG)]
Diagnosis condition
Ignition switch ON
Signal (terminal)
CAN communication signal
87
Thr ...
Lib 12v Branch Line Circuit
Diagnosis Procedure
CHECK CONNECTOR
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side).
12V sub battery (lithium ion battery)
...
Manual air conditioner and heater
Basic information
(fan speed control) dial
Dial pointers
A/C (air conditioner) button
Air flow control buttons
Temperature control dial
(front defroster) button
(rear window defroster) button
(air recirculation) button
Controls
Turning system on/off:
To activate the system, turn t ...
